Nilfisk-Advance America C 120.5 X-TRA After using your pressure washer, Storing the washer

6 After using your pressure washer

6.1 Storing the washer	The machine should be sto-
	red in a frost-free room!
	Pump, hose and accessories
	should always be emptied of
	water prior to storing as follows:
	1. Stop the machine (turn
	the start/stop switch (1) to
	position"O") and detach wa-
	ter hose and accessory.
	2. Restart the machine and
	activate the trigger. Let the
	machine run until no more
	water runs through the spray
	gun.

3.Stop the machine, unplug and wind up hose and cable.

4.Place spray handle, nozzles and other accessories in the holders of the machine.

Should the machine by mistake be frozen, it will be necessary to check it for damage.

NEVER START-UP A FROZEN MACHINE.

Frost damages are not covered by the guarantee!

6.2Winding up of electric cable and high pressure hose

C 120.3

C 125.3

C 120.3

C 125.3

C 120.5 X-TRA

C 120.5 X-TRA

To avoid accidents, the electric cable and the high pressure hose should always be winded carefully up.

Wind up the electric cable and the high pressure hose on the appropriate hooks. Built-in clip for good holding.

The high pressure washer comes in two models: A) with hook for storage of high pres- sure hose (14) - B) with a hose reel (13), where the hose is pushed into the reel and after- wards winded up.

11