Manuals / Nilfisk-Advance America / Lawn and Garden / Pressure Washer

Nilfisk-Advance America C 120.5 X-TRA, C 120.3 Cleaning of machine, vents, Greasing of couplings

Models: C 120.5 X-TRA C 125.3 C 120.3

1 20

Page 14

7.3 Cleaning of machine	The machine should be kept
vents	clean so as to let cooling air
	pass freely through the ma-
	chine vents.

7.4 Greasing of couplings	To ensure an easy connec-
	tion and that o-rings do not dry
	up, the couplings should be
	greased regularly.

Page 14

Image 14

Nilfisk-Advance America C 120.5 X-TRA Cleaning of machine, vents, Greasing of couplings, The machine should be kept

Contents

Nilfisk C Nilfisk C Nilfisk C 120.5 X-TRA 128330335Copyright 2010 Nilfisk, Division of Nilfisk-Advance A/S Index 1 Safety Precautions and WarningsSymbols used to mark in- structions Especially checkPressure safety device Mains power connectionSafety devices Locking device on spray gun 7a see foldout at the end of this manualCar, motorbike, boat, cara 2 Description2.1 Application van, trailer, patio/drive/ﬂag3.2 Mounting of trolley hand- le and hose reel models with hose reel 3 Before you start using your pressure washer3.1 Mounting of trolley handle and hose hook 3.3 Mounting of cable book C 120.5 X-TRA4 Operating your pressure washer lance and Click & CleanWarning When attaching the Click 3.5 Mounting of high pres- sure hosePoint the nozzle at the ground 4.4 Start and stop of the machine when con- nected to a water supply4.3 Water connection IMPORTANT! Only use water without any5.1 General 5 Fields of application and working methods4.6 Pressure regulation on the TORNADO PR- nozzle 5.1.2 Mechanical effectClean’ Accessories ‘ClickCleaning method 5.2 Typical ﬁelds of application6.1 Storing the washer 6 After using your pressure washerFrost damages are not covered by the guarantee The machine should be stoImportant The bearing capacity of the wall hook 6.3 Storage of accessories6.4 Wall storage 7 Maintenance 7.1 Cleaning of water inlet ﬁlter 7.2 Cleaning of nozzle7.4 Greasing of couplings 7.3 Cleaning of machinevents clean so as to let cooling airSymptom 8 Trouble-shootingCustomer Services at Penrith Cause9.2 Warranty conditions 9 Further informationAdjusted in angles from 0 - 90 for better working posture and 9.3 AccessoriesClick & Clean cleaning of hard to get at places as for instance barrels or theMetal Cleaner Stone & Wood CleanerPlastic Cleaner Car Combi CleanerPage Нилфиск-Эдванс 127015 Москва Вятская ул. 27, стр. 7 Россия HEAD QUARTERSALES COMPANIES

7.3 Cleaning of machine

The machine should be kept

vents

clean so as to let cooling air

pass freely through the ma-

chine vents.

7.4 Greasing of couplings

To ensure an easy connec-

tion and that o-rings do not dry

up, the couplings should be

greased regularly.