BECOME FAMILAR WITH YOUR NEW EXTRACTOR
1
3 2
4
5
10
6 
9
7
8
MACHINE DESCRIPTIONS
Operator Handle (1) - Operator holds this to move the machine from one location to another. Solution Tank Lid (2) - Fill Solution Tank here with warm water and chemicals.
Switch Plate (3) - This is where the switches are located that operate the pump, vacuum and heater. Recovery Tank Lid (4) - The Recovery Tank can be flushed out by running clean water into this opening with the Drain Gate (7) open. The vacuum float
Vacuum Inlet (5) - This is where the vacuum hose attaches to the machine.
Latch (6) - Open the latches to access the base compartment, which contains the motors and heater. Drain Gate (7) - Open this gate to drain the recovered solution out of the machine. Be sure to keep this gate clean.
Castor (8) - The castor swivels for easy maneuvering in tight spots. Wheel (9) - Large,
Power Cord(10) - One, 25 foot cord. Do not use if the cord is damaged.
