OPERATION

1Inspect the machine, hoses, and cleaning tools for cleanliness and completeness.

2Fill the Solution Tank with warm water. Using warm water may be a benefit in cleaning effectiveness, but do not use hot water (above 54°C / 130° F+) in the tank. Add liquid cleaning solution with a pH value of between 6 and 9. High pH detergents and/or acid rinses will accelerate the wear of the seals and will void the warranty.

3Plug in the power cords. Turn the Heat switch on.

4Attach the spray hose to the solution quick disconnect on the front of the machine and attach the vacuum hose to the hose barb on the recovery tank. Attach the other ends of the hoses to the cleaning tool.

5Allow the heat exchanger two minutes to reach operating temperature.

6Turn the pump on. Turn the vacuum on. NOTE: the pump has a built in pressure switch; the pump runs only while you are spraying.

7Begin cleaning using the correct hoses and tool.

8Use defoamer in the recovery tank any time foaming occurs.

9Monitor the water level in the solution tank. Do not let the pump run dry.

10When the solution tank gets low, turn off the pump, fill the solution tank, empty and clean the recovery tank.

11When finished with the job, remove any unused solution from the solution tank, and run a few gallons of clean water through the system to rinse out any detergent.

CAUTION! If water or foam comes out of the vacuum exhaust, turn the machine off immediately

BALL FLOAT VACUUM SHUT-OFF

Prior to using the machine, always check that the float filter is clean and the ball can travel freely. When the recovery tank is full, the ball float will rise and will shut off the vacuum flow to prevent any more water from entering the tank. Turn off the vacuum, and empty the recovery tank.

NOTE: if foam is present or if the ball float is prevented from rising, the float will not be able to stop the air flow, and the tank may over fill.

CAUTION!

To avoid vacuum motor damage, always make sure the float filter is clean and the ball can travel freely prior to using the machine. And always use a defoamer when foaming occurs.

11-600203072REVA

Page 5
Image 5
Nilfisk-Advance America MX 307 H instruction manual Operation, Ball Float Vacuum SHUT-OFF

MX 307 H specifications

The Nilfisk-Advance America MX 307 H is a powerful and versatile vacuum cleaner designed to meet the rigorous cleaning demands of commercial environments. This high-performing machine stands out for its compact design, robust construction, and advanced features, making it an ideal choice for various applications, including offices, schools, healthcare facilities, and retail spaces.

One of the defining features of the MX 307 H is its powerful suction capability, which ensures effective dust and debris removal. Equipped with a high-efficiency motor, this vacuum cleaner delivers a strong airflow, facilitating thorough cleaning on a variety of floor surfaces, including carpets, hard floors, and upholstery. Its impressive suction performance not only enhances cleaning efficiency but also contributes to improved indoor air quality.

The MX 307 H is designed with user-friendliness in mind. Its ergonomic handle and lightweight design make it easy to maneuver, reducing operator fatigue during prolonged cleaning sessions. The vacuum also features a flexible hose and an array of on-board tools that allow users to tackle hard-to-reach areas with ease. This extensive toolkit makes the MX 307 H an all-in-one solution for cleaning tasks, from corner dusting to deep carpet cleaning.

Another significant aspect of the Nilfisk-Advance America MX 307 H is its durable construction. Built with high-quality materials, this machine is engineered to withstand the demands of daily use in commercial settings. The robust design not only enhances its longevity but also minimizes maintenance interruptions, allowing businesses to maintain a consistent cleaning schedule.

In addition, the MX 307 H incorporates advanced filtration technologies, such as HEPA filtration, which captures fine dust particles and allergens, providing a healthier environment for users. This feature is particularly valuable in spaces where cleanliness and air quality are paramount, such as healthcare facilities and educational institutions.

Overall, the Nilfisk-Advance America MX 307 H is an exceptional choice for organizations seeking a reliable, efficient, and user-friendly vacuum cleaner. With its powerful suction, versatile attachments, ergonomic design, and advanced filtration, this machine delivers outstanding cleaning performance while enhancing user comfort and contributing to a healthier indoor environment. Its combination of functionality and durability sets it apart in the competitive landscape of commercial cleaning equipment, making it a valuable investment for any business.