Store
Apagado Éteint
Operate
En operacion
En marche
Clean under
Aspirado por debajo
Aspiration en dessous
HOW TO USE
(See Fig. 10)
1.Remove electrical cord from hook and plug into electrical outlet.
2.Slide height adjustment to the desired setting.
3.Press the handle release pedal and pull the handle to the desired position, the unit will turn on auto- matically when handle is pulled down. To clean under, press the pedal again and lower the handle.
4.Vacuum slowly with forward and backward strokes, covering small areas at a time. The time required to clean the carpet will depend on type of carpet and amount of dirt.
5.The unit will turn off automatically when the handle is returned to the vertical position.
Fig. 10
Height Adjustment
Adjuste de altura
Réglage de la hauteur
HEIGHT ADJUSTMENT
The front of the cleaner has a continuous height adjustment which raises or lowers the cleaner base to match the type of carpet. With the cleaner cord unplugged, set the adjustment according to your specific needs (Fig. 11).
While the cleaner is off and disconnected from the outlet, tilt the cleaner back to remove weight from the front wheels, and adjust the setting.
Plug the cleaner into electrical outlet, press the handle release, lower handle and pass the cleaner over the carpet. If the cleaner is difficult to push, follow the procedure and test the cleaner at the next height setting until the unit is comfortable to move. the brush roll must make contact with the carpet for effective cleaning.
Fig. 11
Page | CLARKE TECHNOLOGY 530 Upright Vacuum Operator's Manual |
