B-8 / ENGLISH

AFTER USING THE MACHINE

1Turn the Power Switch OFF (O). Unplug the Power Cord (10). Coil the cord and hang it from the cord hook.

2To empty the solution tank, pull the Solution Drain Hose (15) off the elbow. Direct the hose to a designated waste water “DISPOSAL SITE”. Rinse the tank with clean water. Inspect the solution hoses; replace if kinked or damaged.

3To empty the recovery tank, take the Recovery Drain Hose (12) off its hanger. Direct the hose to a designated waste water “DISPOSAL SITE” and remove the plug (hold the end of the hose above the water level in the tank to avoid sudden, uncontrolled flow of waste water). Rinse the tank with clean water. Inspect the recovery and drain hoses; replace if kinked or damaged.

4Remove the brush, rinse with warm water and remove any built-up string, hair or carpet fibers.

5Disconnect the Recovery Hose (3) from the Recovery Tank Dome Lid (4) and flush with warm water to wash any debris out of the Recovery Hose and Vacuum Shoe.

6Wipe the machine with a damp cloth. Do not use abrasive chemicals or solvents.

7Perform any required maintenance before storage.

MAINTENANCE SCHEDULE

MAINTENANCE ITEM

Daily

Weekly

Yearly

Check / Clean Power Brush

 

 

Check / Clean Tanks & Hoses

 

 

Check / Clean Vacuum Shut-Off Float

 

 

Clean Vacuum Shoe

 

 

Clean “Maintenance” Spray Nozzle

 

 

Inspect & Clean Solution Screen

 

 

*Check Carbon Brushes

 

 

*Have a Nilfisk service technician check the vacuum motor carbon brushes once a year or after 300 operating hours. The brush motor carbon brushes check every 500 hours or once a year.

IMPORTANT!

Motor damage resulting from failure to service the carbon brushes is not covered under warranty. See the Limited Warranty Statement.

8Store the machine indoors in a clean, dry place with the tank dome lid open. Keep from freezing.

9Place the machine in the storage position. This will prevent the brush from taking a set which will increase the brush life and maintain the performance of the brush.

Lift up on the Handle Release Pedal (16) then push the Handle Assembly (19A) forward to place the machine in the storage position.

VACUUM SHOE MAINTENANCE

Check the vacuum shoe daily. Remove any built-up string, hair or carpet fibers. See Figure 6. The vacuum shoe can be removed by pulling on the Pin Release (7) and sliding the Vacuum Shoe (8) off. Then disconnect the recovery hose from the shoe.

FIGURE 6

7

8

B-8- FORM NO. 56041671 - AX 410

revised 12/08

Page 22
Image 22
Nilfisk-ALTO 56265002, 56265007 manual After Using the Machine, Maintenance Schedule, Vacuum Shoe Maintenance

56265007, 56265002 specifications

The Nilfisk-ALTO 56265002 and 56265007 are highly efficient pressure washer models that exemplify the brand's commitment to quality and performance in cleaning technology. These machines cater to both commercial and industrial applications, making them ideal for a variety of users looking for robust cleaning solutions. Their design integrates advanced features and technologies that set them apart from competitors.

One of the main features of the Nilfisk-ALTO 56265002 and 56265007 is their powerful electric motor, capable of delivering high-pressure water output. With pressure ratings that can effectively remove dirt, grime, and even stubborn stains, these models provide cleaning solutions for a range of surfaces, including concrete, brick, wood, and vehicles. The units also come equipped with various nozzle options, enabling users to customize the pressure and spray patterns, enhancing versatility for specific cleaning tasks.

Both models are engineered with durability in mind. Constructed from high-quality materials, they are designed to withstand harsh environments typically encountered in commercial settings. This durability is complemented by a compact and ergonomically designed body that enhances user comfort and mobility during operation.

In terms of technology, the Nilfisk-ALTO series incorporates an efficient water management system that optimizes water usage without compromising cleaning power. This environmentally friendly aspect not only conserves water but also minimizes operational costs. Additionally, the machines are equipped with advanced thermal protection systems, which prevent overheating, thus extending their lifespan and ensuring reliable performance.

The Nilfisk-ALTO 56265002 and 56265007 also feature an intuitive control panel that allows for easy operation. Users can quickly adjust settings to match their cleaning requirements, making these machines suitable for both experienced users and novices alike. Moreover, the incorporation of a user-friendly hose reel system reduces clutter and provides quick and easy storage.

Maintenance is simplified with these models, thanks to their accessible components that allow for easy cleaning and repair. This focus on convenience ensures that users can keep their machines in optimal condition without excessive downtime.

In summary, the Nilfisk-ALTO 56265002 and 56265007 pressure washers are powerful, durable, and user-friendly cleaning solutions that provide exceptional performance for various applications. With their advanced features, efficient technologies, and emphasis on ergonomic design, they represent a significant investment for businesses and individuals serious about effective cleaning.