![](/images/new-backgrounds/1150672/15067221x1.webp)
| 14 |
Your
Unfortunately, many low budget components fall short of these levels, so we need to "baby" their level, and find an- other source for the signal strength necessary to drive the power amplifiers, in such situations, the
NOTE: The remaining controls of stereo channel are the same as in the mono channel section.
4.3 MASTER Section
| 15 |
This control sets the amount of signal sent either to the main out socket or to the tape output.
16 |
This stereo 4 segments LED meter will indicate the level of the overall output signal.
| 17 |
This LED indicates when the power is on in your
21
22
2TK IN
- 8 | MAX |
0
AUX SENDS
- 8 | +15 |
2TK TO
CTRL ROOM
2TK TO MIX
TAPE
0
PHONES
/ CTRL ROOM
- 8 | MAX |
19
20
23
| 18 |
This LED indicates when the phantom power is switched on.
19 |
Engaging this button to route the 2 TRACK IN signal into the control room output.
| 20 |
Engaging this button to route the 2 TRACK IN signal into the main output.
|
| OUTPUT LEVEL | |
| L |
|
|
16 | 0 | +5 CLIP PH | |
|
|
|
R
PWR
- | 8 | +15 |
MAIN MIX LEVEL
15
18
17
| 21 |
This control is used to adjust the level of 2TK IN signal, which can be varied from
| 22 |
This control is used to determine the master AUX SEND levels, which can be varied from
10