Nilfisk-ALTO AMX-120 3. READY TO START?

3. READY TO START?

3.1 Please check theAC voltage available in your country before connecting your AMX-120 to the AC socket.

3.2 Be sure that the main power switch is turned off before connecting the mixer to theAC socket. Also, you should

make sure that all Input and output controls are turned down. This will avoid damages to your speakers and avoid

excessive noise.

3.4 Before disconnecting theAMX-120 always turn-off the power switch.

3.5 Do not use solvents to clean yourAMX-120. A dry and clean cloth will be OK.

3.3 Before turning on theAMX-120 you shall connect it to a power amplifier and turn-on the mixer BEFORE the power

amplifier.Once you have finished your working session you shall turn the mixer off AFTER the power amplifier.