5
english
ATTIX 360-2M
ATTIX 550-2M / ATTIX 560-2MXC
ATTIX 751-2M / ATTIX 761-2MXC
1) Option depending on model
2.2 Operating elements See fold-out page at the front of
these operating instructions.
1 Handle
2 Suction pipe suppor t
3 Accessory holder
4 Applicance switch with
suction power control
5 Retaining clamp
6 Dirt tank
7 Grip to empty tank1)
8 Inlet fitting
9 Appliance socket1)
10 Cable hook
11 Operating knob for filter
cleaning1)
12 Tank locks1)
13 Castor with brake
14 Hose diameter setting
3 Before start-up
3.1 Assembling the cleaner
1. Open the retaining clamps
and lift off the upper section
of the cleaner.
2. Take the accessories out of
the dirt tank and the packag-
ing.
On delivery some of the accesso-
ries are lying in the tank and must
be removed before the vacuum
cleaner is used for the first time.
Remove the upper section of the
vacuum cleaner:
The mains plug should not be in-
serted into a socket.
3. To pick up dust with maxi-
mum room concentration
values:
Insert the filter bag into the
dirt tank according to the
instructions (instructions in-
cluded).
To pick up harmless dust:
Insert the disposal bag (in-
structions included) into the
tank.
IMPORTANT: Press
the filter bag connection
firmly on to the inlet fitting.
4. Fit the upper section of the
vacuum cleaner and close
the retaining clamps.
NOTE: Ensure that the
retaining clamps fit properly.
4 Operation
4.1 Connections
4.1.1 Connecting the suction
hose
The suction hose diameter must
suit the position of the switch in
order to pick up dry, nonflammable
dust with maximum room concen-
tration values.
1. Connect the suction hose.
4.1.2 Electrical connection The operating voltage shown on the
rating plate must correspond to the
voltage of the mains power supply.
1. Ensure that the vacuum
cleaner is switched off.
2. Insert the power cord into a
properly installed and fused
socket with an earthing con-
tact.