Nilfisk-ALTO C.A.V. 15 manual Howtoprepare Themachinefor Operation, Figure Figure

Figure 7

Figure 8

HOWTOPREPARE THEMACHINEFOR OPERATION

How to Install the Dust Control Skirt

To install the skirt, follow this procedure:

1.Wrap the skirt around the bumper such that the draw string can be inserted into the recess of the bumper. See figure 7.

2.Orient the brush fastening strap at the rear of the machine to prevent scratching surfaces.

3.Tighten and tie the string on the skirt into a bow knot so it can later be untied for removal of the skirt.

4.Twist the ends of the string (see figure 7) and insert them into the recess of the bumper as shown in figure 8.

NOTE: The skirt should be stored flat on the floor either on or off of the machine.

Page -18 - Clarke® American Sanders Operator's Manual - Sander 1600DC