3Before you start using your pressure washer
EN
3.1Mounting of trolley handle (models with trolley handle)
3.2Mounting of hose reel handle (models with hose reel)
3.3Mounting of quick coupling
1.Remove the label on top of machine.
2.Push down the trolley handle (12) into the machine. Secure the handle by tightening the 2 screws.
3.Mount the hose hook (14) on the handle (3 screws). Note: the hose hook can be mounted on the front as well as on the back. Front position is to be used if the product is used together with a special wall hook for wall storage.
1.Click the hose reel handle on to the trolley handle (no screws).
1.Screw the quick coupling (16) tight on to the water inlet (2).
Note: The inlet fi lter must al- ways be fi tted in the water inlet pipe to fi lter out sand, limestone and other impurities as these will damage the pump valves.
Caution: Failure to fi t the fi lter will invalidate the
guarantee.
5
