EN 8 Trouble-shooting

To avoid unnecessary disappointments, you should check the following before contacting the Nilfi sk- ALTO service organization:

Symptom

Cause

Recommended action

Machine refuses to start

Machine not plugged in

Plug in machine.

 

Defective socket

Try another socket.

 

Fuse has blown

Replace fuse. Switch off other machines.

 

Defective extension cable

Try without the extension cable.

Fluctuating pressure

Pump sucking air

Check that hoses and connections are air-

 

 

tight.

 

Valves dirty, worn out

Clean and replace or refer to local Nilfi sk

 

or stuck

ALTO distributor

 

Pump seals worn out

Clean and replace or refer to local Nilfi sk-

 

 

ALTO distributor.

Motor busses

Low voltage or

Activate the trigger of the spray gun.

 

low temperature

 

Machine stops

Fuse has blown

Replace fuse. Switch off other machines.

 

Incorrect mains voltage

Check that the mains voltage corresponds

 

 

to specifi cation on the model tag.

 

Thermal sensor activated

Leave the washer for 5 minutes to cool

 

 

down.

 

Nozzle partially blocked

Clean the nozzle (see section 7.2)

Fuse blows

Fuse too small

Change to an installation higher than the

 

 

amp. consumption of the machine.

 

 

You may try without the extension cable.

Machine pulsating

Air in inlet hose/pump

Allow machine to run with open trigger until

 

 

regular working pressure resumes.

 

Inadequate supply of

Check that the water supply corresponds to

 

mains water

specifi cations required (see model tag)

 

 

NB! Avoid using long, thin hoses (min. 1/2")

 

Nozzle partially blocked

Clean the nozzle (see section 7.2)

 

Water fi lter blocked

Clean the fi lter (see section 7.1)

 

Hose kinked

Straighten out hose.

Machine often starts

Pump/spray gun is

Contact your nearest Nilfi sk-ALTO Service

and stops by itself

leaking

Centre.

Machine starts, but

Pump/hoses or accessory

Wait for pump/hoses or accessory to thaw.

no water comes out

frozen

 

 

No water supply

Connect inlet water.

 

Water fi lter blocked

Clean the fi lter (see section 7.1)

 

Nozzle blocked

Clean the nozzle (see section 7.2)

 

 

 

In case problems other than the above occur, please contact your local Nilfi sk-ALTO distributor.

14

Page 14
Image 14
Nilfisk-ALTO E 140.1, E 130.1 user manual EN 8 Trouble-shooting

E 140.1, E 130.1 specifications

Nilfisk-ALTO is a renowned brand in the realm of cleaning equipment, offering a variety of high-performance pressure washers that cater to both DIY enthusiasts and professional users. Among their standout models are the Nilfisk-ALTO E 130.1 and E 140.1, which exemplify efficiency, versatility, and user-friendly design.

The Nilfisk-ALTO E 130.1 is engineered for domestic cleaning tasks, making it ideal for users who seek a powerful yet compact pressure washer. With a maximum pressure of 130 bar and a water flow rate of 440 liters per hour, this model delivers ample cleaning power for various surfaces, from patios and driveways to garden furniture and vehicles. The E 130.1 features an innovative click-and-clean nozzle system, allowing users to easily switch between pressure and wide-angle spray patterns, enhancing its functionality for different applications.

In contrast, the Nilfisk-ALTO E 140.1 offers a higher performance level, with a maximum pressure of 140 bar and a flow rate of 500 liters per hour. This model is ideal for more demanding cleaning tasks, providing the capacity to tackle tougher grime and larger areas more efficiently. The E 140.1 also boasts the click-and-clean system, which makes it easy to customize the cleaning experience based on the task at hand.

Both models are equipped with an integrated detergent tank, allowing for easy application of cleaning solutions to enhance efficiency. They are designed with ergonomics in mind, featuring comfortable handles and lightweight constructions that make them easy to maneuver. The robust wheels further improve mobility, ensuring that users can transport the machines effortlessly across various terrains.

A significant feature of both the E 130.1 and E 140.1 models is their automatic start-stop function. This technology enhances energy efficiency by automatically shutting down the motor when the trigger is not engaged, thereby extending the machine's lifespan and reducing electricity consumption.

In summary, the Nilfisk-ALTO E 130.1 and E 140.1 pressure washers combine power, versatility, and user-friendly features, making them excellent choices for anyone looking to maintain cleanliness around their home or workspace. Their innovative technologies and ergonomic design enhance the overall user experience, solidifying Nilfisk-ALTO's reputation as a leader in the cleaning equipment industry. Whether addressing light or heavy-duty cleaning tasks, these models deliver consistent and effective performance, meeting the needs of a diverse user base.