Nissan 6303, 6802 installation manual

Models: 6303 6802

1 34
Download 34 pages 19.75 Kb
Page 13
Image 13

2.Where the 28 pin ROM has been removed, replace this with a 28 pin machine drilled socket. Fill in the

throughholes where the 24 pin ROM was mounted with solder. Note the orientation of the socket must have the crescent indent facing the same direction of the previously installed ROM chip.

3.Use some holder to connect J4 to J3 as seen in the picture above. This will enable useage of only the 28 pin chip now.

4.Verify ECU operation with new socket using only the factory 28 pin ROM chip. The LEDs should flash when in diagnostic mode, and vehicle should function as normal. If not then immediately remove power and recheck your soldering

Installation of the NIStune board now follows the same procedure as for other 6802 based ECUs.

NIStune Type 1 Hardware Installation

Page 13 of 13

Page 13
Image 13
Nissan 6303, 6802 installation manual

6303, 6802 specifications

Nissan, a renowned automotive manufacturer, has carved a niche in the competitive market with its unique lineup of vehicles, among which the Nissan 6802 and 6303 stand out prominently. These models have been developed to cater to the ever-evolving demands of modern consumers, offering a blend of performance, comfort, and innovative technologies.

The Nissan 6802 is designed with an emphasis on efficiency and performance. One of its main features includes a robust engine that delivers an impressive power output while maintaining optimal fuel economy. This model is equipped with advanced aerodynamics to reduce drag, enhancing both fuel efficiency and stability at high speeds. The 6802 also boasts a spacious interior, fitted with high-quality materials and state-of-the-art infotainment systems that provide drivers with connectivity and convenience on the go.

In terms of safety, the Nissan 6802 is equipped with an array of advanced driver-assistance systems, including adaptive cruise control, lane departure warning, and automatic emergency braking. These technologies work together to provide a safer driving experience, making it suitable for both urban settings and long-distance travel.

On the other hand, the Nissan 6303 takes a more compact approach, focusing on urban mobility without sacrificing performance. This model features a lightweight chassis, which contributes to its agile handling and responsiveness in city driving conditions. The 6303 is powered by an efficient engine, designed to offer a balanced mix of power and fuel economy, making it an ideal choice for daily commutes.

The Nissan 6303 also incorporates cutting-edge technology, such as a digital cockpit that integrates navigation, entertainment, and vehicle information into an easily accessible interface. Furthermore, its compact design allows for versatile space utilization, making it easier to maneuver in congested areas.

Both models emphasize sustainability, with Nissan implementing eco-friendly production techniques and materials. The inclusion of electric options in these lineups reflects the company’s commitment to reducing carbon footprints and promoting greener alternatives for consumers.

In summary, the Nissan 6802 and 6303 are remarkable vehicles that showcase the brand’s dedication to innovation, performance, and safety. With their distinct characteristics and technologies, they cater to a wide range of drivers, enhancing the Nissan experience in different segments of the market.