
EPSON Stylus Pro and Pro XL
Color ink cartridge (S020036):
Colors | Cyan, magenta, and yellow |
Print capacity* | In each color, approximately 1.2 million |
| characters (670 sheets/color, letter, 5% |
| duty at 360 dpi) |
Electrical
Input voltage | 103.5 to 132 V |
range: |
|
Rated frequency | 50 to 60 Hz |
range: |
|
Cartridge life*
Temperature
Dimensions
2 years from production date and up to
6 months after opening the package at 77° F (25° C); based on letter size paper
Storage: −22 to 104° F (−30 to 40° C) 1 month at 104° F (40° C)
Transit: −22 to 140° F (−30 to 60° C) 1 month at 104° F (40° C) 120 hours at 140° F (60° C)
Freezing:** 21.2° F (−6° C)
2.1inches (W) × 2.7 inches (D) × 1.7 inches (H)
(54 mm × 67.4 mm × 41.8 mm)
Input frequency | 49.5 to 60.5 Hz |
range: |
|
Rated current: | 0.6 A |
Power | Approx. 20 W (during self test, |
consumption: | LQ at 10 cpi) |
Environmental
Temperature: | Operation | 50 to 95° F (10 to 35° C) |
| Storage* |
|
|
| 1 month at 104° F (40° C) |
|
| 120 hours at 140° F (60° C) |
*The cartridge life may vary. If you often print large graphics and dense text, you will use up ink cartridges faster than if you print pages with less ink coverage. Cleaning the print heads more often than necessary will also consume ink.
**The ink thaws in approximately 2 hours at 77°F (25°C).
c | Caution: |
❏ Use only genuine EPSON ink cartridges and do not refill | |
| them. Other products may cause damage to your printer |
| that is not covered by EPSON’s warranties. |
| ❏ Do not use an ink cartridge after the expiration date on the |
| package. |
Mechanical
Paper feed method: Friction with auto sheet feeder
Print head life: | 1 billion dots per nozzle | |
Total print volume: | 75,000 pages | |
Dimensions and | Stylus Pro | |
weight: | Width | 19.0 inches (482 mm) |
| Depth | 20.9 inches (530 mm) |
| Height | 7.2 inches (182 mm) |
| Weight | 16.7 lb (7.5 kg) |
| Stylus Pro XL | |
| Width | 22.8 inches (580 mm) |
| Depth | 23.5 inches (597 mm) |
| Height | 7.2 inches (182 mm) |
| Weight | 22.1 lb (10 kg) |
Humidity: | Operation | 20 to 80% RH |
| Storage* | 5 to 85% RH |
|
| (without condensation) |
* Stored in shipping container
Safety Approvals
Safety standards: | UL 1950 with D3, CSA 22.2 950 with D3 |
R.F.I.: | FCC part 15 subpart B class B |
Fonts
The printer comes with an installed set of fonts, which are selectable with the Font button on the control panel. However, the printer always uses the fonts selected through the software program. The only time you need to select the printer’s installed fonts is when the software program does not allow you to select fonts.
Interface Specifications
The printer is equipped with an 8-bit parallel interface and a serial interface.
Parallel Interface
Data format: |
| |||
| compatible | |||
|
|
|
|
|
Synchronization: | STROBE pulse | |||
|
|
|
| |
Handshake timing: | BUSY and ACKNLG signals | |||
Signal level: | TTL compatible | |||
Connector: |
|
Ink Jet Printers | 8/1/95 | EPSON Stylus Pro and Pro |