G e t t i n g s t a r t e d
■Display and standby mode
The indicators described below are shown when the phone is ready for use and no characters have been keyed in by the user. The screen is called ‘standby mode’.
1.Shows the name of the cellular network in which the phone is being currently used, or the operator logo.
2.Shows the signal intensity of the cellular network at your current location.
3.Shows the battery charge level.
4.Shows the current function of
the Navi key 
.
■Changing the covers
Before changing the cover, always switch off the power and disconnect the phone from the charger or any other device. Avoid touching electronic components while changing the covers. Always store and use the phone with the covers attached.
1.Remove the back cover of the phone and battery. See steps 1 and 2 in ”Inserting a SIM card” on page 1.
2.Remove the front cover carefully starting from the bottom of the phone(3).
3.Remove the keymat carefully (4). Press the new keymat into the new front cover starting from the top (5). Make sure that the new keymat is properly positioned (6).
4.Align the top of the front cover with the top of the phone and press the front cover to lock it into place (7).
5.Insert the battery and replace the back cover on. See steps 4 and 5 in ”Inserting a SIM card” on page 1.
4 | Copyright © 2004 Nokia. All rights reserved. |
