Nokia 1203, 1202 manual Get started

4 Get started

Get started

Open the back cover

Press the release button (1), slide the back cover upwards (2), and remove it. This phone is intended for use with the BL-4C battery.

Safe removal. Always switch the device off and disconnect the charger before removing the battery.

Insert the SIM card and battery

1Lift the battery, and remove it (1).

2Insert the SIM card (2). Ensure that the gold-coloured contact area is facing down and the SIM card is inserted with the bevelled corner facing the bottom of the device.

3Replace the battery and back cover (3, 4).

Remove the SIM card

Press the release spring (1) and slide out the SIM card (2).

Charge the battery

Your battery has been partially charged at the factory. If the device indicates a low charge, do the following:

1 Connect the charger to a wall outlet.