Nokia 2180 manual Menu 6 7, Network Feature Setting, To store codes

Press 0HQX 6 6 before dialing. Then choose <HV or 1R and

íenter the number you wish to call at 1XPEHU=, then press to dial.

Or, if you prefer, you can dial the number first. Then press 0HQX 6 6, choose <HV or 1R, and press íor 2. to dial the number.

If you don’t make a selection, your phone uses the current default network setting. Check with your service provider to find out the setting for your home area.

This menu appears on the menu only if activated with Menu 6 7. Contact your service provider for availability.

Note: This feature functions only in systems equipped with Caller ID.

Menu 6 7, Network Feature Setting

Call Forwarding, Call Waiting, Selective Call Acceptance, and Send Own Number are services available through your service provider or dealer. When you subscribe to any of these services, your service provider or dealer gives you a separate code (known as a “feature code”) to activate and deactivate each service.

Menu 6 7 lets you store all the feature codes you use in your phone. Once the feature code is stored in your phone, the service appears as a menu item. You can then use the menu to activate and deactivate &$// )25:$5',1*/ &$// :$,7,1*/ 6(/(&7,9( &$// $&&(37$1&(/ and 6(1' 2:1 180%(5.

To store codes

1)Press 0HQX 6 7

2)At )HDWXUH &RGH=, enter the code you want to store in your phone (e.g. ∗74), then 2.

3)W to the service that the code applies to, then 6HOHFW

4)W to suboption, then 2. (Repeat step as required, based on number of suboptions)

36