GB 26
NaviBars
•You can adjust the dish using channel preview if PID informa-
tion has been entered.
•Press select to start the channel search.
•When you get the message on the screen that ”you have
found X new TV-channels and X new radio channels”, press
select to save the new channels.
The new channels will be saved and added to the TV and radio
lists.
When your antenna is controlled by a motor:
•Select “Channel” in the NaviBars.
•Select “Manual” or “Advanced” search.
•Select the new satellite name.
•Enter the settings for the transponder frequency, polarisation,
etc., for the new satellite.
•Adjust the antenna towards the new satellite using “Adjust
motor”. Please note: With a user-defined satellite, you do not
see a TV picture in the background of the screen. You can get
a preview of the TV picture if PID information has been en-
tered. Look at the signal strength (AGC) bar to check the sig-
nal. When the Signal strength is at its best:
•Press select to start the channel search.
•When you see a message on the screen that “you have found
X new TV channels and X new radio channels”, press select
to save the new channels.
The new channels will be saved and added to the TV and radio
lists.
Edit Satellites
You can change the name, position and orientation of a user de-
fined satellite. Predefined satellites can only be renamed.
Delete Satellite
You can only delete user-defined satellites.
When you delete a satellite, you also delete the channels that
belong to it.