GB 31
Settings folder ☛ Time
To open this menu, you will be asked to enter your access code.
The access code is set to 1234 at the factory.
The time is adjusted using the cursor up/cursor down button,
half an hour at a time. You can also adjust the minutes using the
cursor left/cursor right button.
Settings folder ☛ Access
To open this menu you will be asked to enter your access code.
The access code is set to 1234 at the factory.
The following settings can be altered from this menu.
Access Control
Select “Yes” or “No” to turn the access control for all menus on
or off. Note: Even when “No” has been selected, the access
code must still be entered before you can watch locked channels.
Receiver lock
If you select “Yes” you will have to enter the access code every
time you activate the Mediamaster from standby mode.
Age rating control
If you want everybody to have access to all available types of pro-
grammes, select “No”
If you select “Yes”, you may block programmes that are unsuit-
able for children.
Age Limit
Select an age limit between 3 and 18 years on the line that ap-
pears.
However, you should be aware that not all Service Providers have
implemented the necessary codes for these functions in their
transmissions.
Change access code
You can change the access code from the standard factory
setting of 1234. DO NOT FORGET YOUR ACCESS CODE!
Without it, you will not have access to any of the functions
that require the code!
Picture format
If you have a TV set with a 4:3 picture format and the transmis-
sion is 16:9, you can select “Fullscreen” or “Letterbox”.
Fullscreen will fill the screen but some information on the left and
right sides will be cut off.
Letterbox will give a complete picture, but black areas will be vis-
ible at the top and bottom of the screen. ‘letterbox’‘fullscreen’
NaviBars