Voice dialing
Make a phone call by saying the name that is saved in the contact list of the phone.
As voice commands are
Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances.
1.In the standby mode, press and hold the right selection key or the volume down key. A short tone sounds, and Speak now is displayed.
2.Speak the name of the contact you want to dial. If the voice recognition is successful, a list with matches is shown. The phone plays the voice command of the first match on the list. If it is not the correct command, scroll to another entry.
Options during a call
Many of the options that you can use during a call are network services. For availability, contact your service provider.
Write text
Text modes
To enter text (for example, when writing messages) you
16 can use traditional or predictive text input.
During a call, select Options and from the following options:
Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record, Voice clarity, Loudspeaker or Handset.
Network options are Answer or Reject, Hold or Unhold, New call, Add to conference, End call, End all calls, and the following:
●Send DTMF — to send tone strings
●Swap — to switch between the active call and the call on hold
●Transfer — to connect a call on hold to an active call and disconnect yourself
●Conference — to make a conference call
●Private call — to have a private discussion in a conference call
Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.
When you write text, press and hold Options to toggle
between traditional text input, indicated by | , and | |
predictive text input, indicated by | . Not all languages | |
are supported by predictive text input. |
|
|
