Nokia 3590 Set up the car profile, Set up the loopset profile, Set up the TTY/TDD profile

Set up the car profile

If you are using your phone with a Nokia-approved car kit, you can set lights to On (lights stay on) or Automatic (after 15 seconds, lights turn off until the next key is pressed or the phone rings).

Set up the loopset profile

The LPS-3 Loopset gives people with T-coil equipped hearing aids the ability to make and receive calls without noise interference.

Important: Refer to the booklet that comes with the LPS-3 for complete instructions and safety information.

1Plug the loopset jack into the bottom of your phone, as shown in the illustration.

2Press Menu 4 6 3 (Settings > Accessory settings > Loopset).

3Scroll to Use loopset, then press Select.

Loopset

4Scroll to Yes, then press Select.

12	Note: If you want to use the headset or
	TTY, you need to follow steps 2-3 above, then select No to
	deactivate the loopset profile.

Set up the TTY/TDD profile

You can connect your phone to a TTY/TDD using the Nokia TTY/TDD Adapter (HDA-9). In order for your phone to recognize the TTY/TDD, you’ll need to set up the TTY/TDD profile, under Accessory settings.

Important: Some manufacturers of TTY/TDD devices suggest that the phone be least 18 inches from the TTY/TDD device. Remember — when connecting to any other device, read its user guide or contact its manufacturer for detailed instructions and safety information.

[ 72 ]