Memory—Non-owner cards can access UIM memory. Any changes to the memory setting requires the security code. The owner card has access to all features, but the security code is required to change a memory setting

Phone—The security code is required upon power-up.

4.A message appears in the display confirming your selection.

Security code

Note: Avoid using codes similar to emergency numbers such as 911 to prevent accidental dialling of the emergency number.

The security code controls access to security features in the Security settings menu. The preset code is 12345. Once you change the security code, keep the new code secret and in a safe place separate from your phone.

Note: If you enter the wrong security code five times in succession, you will not be able to enter a code for five minutes, even if you power off the phone between incorrect entries.

S e t t i n g s ( M e n u 4 )

1.At the standby mode, select Menu > Settings > Security settings > Access codes > Change security code.

2.Enter the current security code (default is 12345), and press OK.

3.Enter the new security code (5 digits), and press OK.

4.Enter the new security code again, and press OK.

Voice privacy

Voice privacy is a network service. See “Network services”, 9 for more information. If your wireless service provider supports this feature, the voice privacy feature protects the privacy of your current phone conversation from other callers placing phone calls on your same network.

1.At the standby mode, select Menu > Settings > Security settings.

2.Select Voice privacy > On or Off.

Network

The menu options you see in your phone are based on your service provider’s network. The network determines which options actually appear in the phone menu. Check with your service provider for more information.

Copyright © 2004 Nokia. All rights reserved.

55

Page 55
Image 55
Nokia 6015 manual Network, Security code, Voice privacy, At the standby mode, select Menu Settings Security settings