Making connection to Internet, Click OK

U s i n g y o u r N o k i a C D M A p h o n e a s a m o d e m

■Installation of Nokia CDMA Modem Driver

•Before installing the modem driver, you need to know the COM port used by DKU-5 data cable. To check the COM port used, click Start > Control Panel > Switch to Classic View.

Note: For Windows2000, click Start > Control Panel.

•Select System > Hardware > Device Manager.

•Click Ports (COM & LPT). If Port 1 on Nokia Adapter indicates COM5, then select COM5 during installation of the modem driver. COM port used by DKU-5 data cable can be different on different computers. In some computers, COM port used will always change when you disconnect DKU-5 data cable from the computer. Therefore, before making any Internet connection to Nokia CDMA phones, please make sure that Port used for modem is the same port, as detected by Device Manager.

•Modem installation will proceed. Click Start > Control Panel > Switch to Classic View.

Note: For Windows2000, click Start > Control Panel.

•Select Phone and Modem Options.

•On upper side, there are several Tab options: Dialling rules, Modems, Advanced.

•Select Modems, then Add, click Don't detect my modem > Next > Have Disk.

•Click Browse, then browse to nmpCDMA_1x(USB).inf file that you downloaded from www.nokia-asia.com or http:// www.nokiausa.com/phones/ software/.

•Click OK.

•Select Nokia CDMA2000 1X 3G Packet Data Modem, click Next.

•Select the same COM port as detected by Device Manager, and click Next > Continue Anyway.

•Modem installation is completed. Click Finish to complete modem installation.