Recorder
Copyright © 2004 Nokia. All rights reserved. 49
You can use a shortcut to access the list of voice commands
direct from the standby display:
aPress and scroll left with .
aYou can now view the list of Voice commands.
aFollow the instructions shown on the display.
Executing a voice command
xWhen an application using the GPRS connection is sending
or receiving data, you cannot execute a voice command. To
do so, you must first end the application using the GPRS
connection.
To execute a voice command,
aPress .
The message Speak now will appear on the display.
aSay the voice command loudly and clearly.
Your car kit phone will play back the voice command and
automatically perform the function assigned to it 1.5 seconds
later.
Recorder
The tape recorder feature allows you to
record pieces of speech, sounds or an
active phone call. This is especially useful
if you need to note information during a
call: for example, you can record a name or a number to be
written down later.
xObey all local laws governing recor ding of calls. Do not use
this feature illegally.
You can make up to 10 recordings as lo ng as you do not exceed
an overall recording time of five minutes. Each recording is
saved together with the running number, the length and time of
the call.
New recordings are automatically saved in the memory. When
the memory is full, the message No memory to save rec. will be
shown on the display. To be able to make new tape record ings,
you will first have to erase some old ones.
aPress and hold to begin recording during a phone call.