Nokia 6126 manual Get started, Install SmartChip card and battery, Close the SmartChip card holder

6126.EN_ESv1_BIL_9249003_Cingular_UG.book Page 12 Friday, May 26, 2006 1:22 PM

G e t s t a r t e d

1. Get started

■Install SmartChip card and battery

Always switch the device off and disconnect the charger before removing the battery.

Keep all SmartChip cards out of the reach of small children.

For availability and information on using SmartChip card services, contact your SmartChip card vendor. This may be the service provider, network operator,

or other vendor.

This device is intended for use with BL-4C battery. Always use original Nokia batteries. See "Nokia battery authentication," p. 74.

The SmartChip card and its contacts are damaged by scratches or bending, so be careful when handling, inserting, or removing the card.

To remove the back cover of the phone, press sightly (1), and slide the cover off (2). Remove the battery as shown (3).

Open the SmartChip card holder (4), and insert the SmartChip card properly into the holder (5).

Close the SmartChip card holder (6).

Replace the battery (7). Slide the back cover into its place (8, 9).

12