Nokia 6150 manual Answering a Call, In-Call Options, Speed Dialling a Phone Number, Call Waiting

Speed Dialling a Phone Number

If you have assigned a phone number to one of

the speed dialling keys ( to ), you can call that phone number in either of the following ways:

•Press the corresponding speed dialling key

and press .

•If the Speed Dialling function is set to on (see

Menu 4-3-3): Press and hold the correspond-

ing speed dialling key ( to ) until

the call is started. NOTE: Pressing and holding

dials your voice mailbox number.

Answering a Call

1To answer the call, press .

2Press to end the call.

TIP: To reject an incoming call, press

. If the ‘Divert when busy’ function is activated to divert the calls, for example to your voice mail- box, rejecting an incoming call will also divert the call. See chapter 10 - ‘Call Divert (Menu 5)’.

NOTE: If more than one name is found in the Phone Book with the same last seven digits as the caller’s phone number, only the caller’s phone num- ber will be displayed, if this is avail- able.

Call Waiting

This network service allows you to answer an in- coming call while you have a call in progress if you have activated the menu function Call Wait- ing Options (Menu 4-3-4).

1Press Answer or . The first call is put on hold. To reject the new call, press Options, choose Reject and press Select.

2To switch between the two calls, press Swap

or .

3To end the active call, press .

Call Functions

In-Call Options

Your phone provides a number of control func- tions that you can use during a call. You cannot utilise all of these functions at all times. Many of the In-Call options are network services. By pressing Options during a call the following In-Call options may be available:

Hold or Unhold	to hold or release a call
New Call	to make a call when you
	have a call in progress
Send DTMF	to send DTMF tones
End all calls to end all calls
Names	to access the Phone Book
Menu	to access menu functions
Mute	to mute the phone’s micro
	phone
Transfer	to connect a call on hold
	with an active call and to

disconnect you from both calls

Making a Conference Call

This feature allows up to six persons to take part in a conference call (network service).

1While in a call, press options and choose New Call. The first call is put on hold.

2To join the first conference participant into the call, press Options, choose Confer- ence and press Select.

3To add a new participant to the call, repeat steps 1 and 2.

4To drop a single participant from the call, press Options, choose Private and press Select. Select the participant that you want to drop and press OK. Then press .

5To end the conference call, press .

Copyright © 2004 Nokia. All rights reserved. 15