Nokia 6160 manual Security code, Changing your security code

Security code

Your phone will prompt you for a security code for cer- tain features. These features can be used only after the correct security code has been successfully entered.

Note: When entering your security code, ***** will appear on the display to keep others from viewing your code.

If you make a mistake entering the code, erase the last digit entered by pressing Clear, or press and hold Clear. Then enter the correct code or press Back to exit the current feature.

If you enter an incorrect security code (Code error will appear) five times in a row, your phone won’t accept any entries for the next five minutes.

Your phone’s default security code is 12345. It’s highly recommended that you change this code at once, write it down, and store it in a safe place away from your phone.

Changing your security code

1.Press Menu 4 3 2 4 (Settings - Security settings - Access codes - Change security code)

2.Enter security code and press OK

3.Enter new security code at Enter new security code:, press OK

4.Enter new security code again at Verify new security code:, press OK

5.Phone will display Security code changed

Note: If you have changed your security code and don’t remember the new code, contact your service provider. Once you have changed your security code, the default setting is no longer valid.

Send own number

In most service areas, when you call someone your name will be presented to his/her caller ID (if they sub- scribe). This feature allows you to block their caller ID (i.e. your number will not be presented) when you call them. This feature works on a per-call basis. Contact your service provider for more details.

59