Copyright © 2002 Nokia. All rights reserved.
Getting started
25
Getting started
■Charging the battery
1. Connect the lead of the charger to the socket on the bottom of
your phone.
2. Connect the charger to an AC wall socket.
The text Charging is displayed briefly if the phone is switched on.
If the battery is completely empty, it may take a few minutes
before the charging indicator appears on the display or any calls
can be made.
You can use the phone while the charger is connected.
The charging time depends on the charger and the battery used. For example, charging a BPS-2 battery
with the ACP-12 charger takes about 1 hours and 40 minutes.
■Switching the phone on and off
Press and hold the power key, .
Note that if the phone displays SIM card not supported even though the SIM card is
properly inserted, contact your network operator or service provider. Your phone does
not support 5 Volt SIM cards and the card may need to be changed.
•If the phone asks for a PIN code, key in the PIN code (displayed as ****), and press
OK.
See also PIN code request in Security settings on page 68 and Access codes on
page 14.
•If the phone asks for a security code, key in the security code (displayed as *****),
and press OK.
See also Access codes on page 14.