Note: The PIN2 is the second PIN code. Its main use is in controlling restricted services. For example, call time limits and restricted phone numbers.
•If the PIN2 code is incorrectly entered three times consecutively, it will be locked. To unlock it, you will need to enter the PUK2 code, which you obtain from your network operator.
•When no more charging units or currency units are left, calls may only be possible to the official emergency number programmed into the device.
If the Credit status is set to Limited and there is only 30 seconds of credit left, the message "Low credit" will appear on the screen. If “Credit expired” appears, you can not make any chargeable calls.
Note: For the availability and more information about the Call meter function, please consult your network service provider.
Call Waiting
If there is an incoming call when you are in the middle of another call and the call waiting function is enabled, the screen will display the number (if available) of the incoming call and call waiting message to alert you.
1.After Call waiting is selected, the device will inquire the status of your call waiting setting. This will take a few seconds.
U s i n g t h e A p p l i c a t i o n P r o g r a m s
2. Select from the following options:
•On: Enable call waiting.
•Off: Disable call waiting.
3. Tap Done to exit.
Calling Cards
You can use this option to set up the device for use with your calling cards.
1.Tap the New button to add a new calling card.
2.Enter necessary information and then tap the Done button.
3.Tap Calling card mode to select from Off, Prompt before call or Always use calling card. If you have multiple calling cards, select one from the Calling cards box first.
4.Tap the Done button.
To delete a calling card, tap to select one in the Calling cards box and then tap the Delete button.
To edit a calling card, tap to select one in the Calling cards box and then tap the Edit button.
Connection alert
When the connection alert function is activated, you will be informed when a successful phone connection is made.
1.Select from the Select connection alert
2.Tap Done.
Copyright ©2006 Nokia All right reserved | 58 |
