Viewing TV
Important general information
The following will describe the basic functions of your Media- master during the watching of TV or listening to Radio channels from the Mediamaster. Sometimes the information may not be displayed as illustrated. Many of the functions described here are dependent on the Service Provider and/or can only be used if they are included in the transmitted programme information.
Please note, that during the Channel Search procedure, the Mediamaster has downloaded ALL available channels. This may include channels from various Service Providers, also those to which you normally do not have access, (unless you have a Smart Card from one of those Service Providers).
If you select a programme to which you do not have access, you will get the message “No Smart Card” or “No Access” on the screen.
IMPORTANT! To toggle between the digital and analogue chan- nels from the Mediamaster you must use the TV button on the Mediamaster remote control. (Both digital and analogue signals are sent to the Mediamaster in the antenna cable).
During watching analogue programmes the Mediamaster display will show the word “TV”. In this mode you select channels on the TV the same way as before you installed the Mediamaster. During watching digital programmes the Mediamaster display will show the name of the channel. In this mode you select TV chan- nels with the Mediamaster remote control.
Ref. to the connection description on page GB 7.
Start/stop watching TV
To start the Mediamaster from 
but- ton, TV button or one of the number buttons on the remote con- trol.
It is also possible to start by pressing the 
button behind the lid on the front of the Mediamaster.
Put the Mediamaster into 
button.
In
Select Channel
Change channel with the numbered buttons or with the up/down buttons on the remote control. You can also use the 
buttons on the front panel of the Mediamaster.
GB 11
