Nokia 9820 T owner manual Technical Specifications

TECHNICAL SPECIFICATIONS

Transmission Standards	Conditional access system:
DVB, MPEG 2	Embedded Viaccess and PCMCIA one interface for
RF input (OFDM)/Modulator output	a Common Interface CA module (DVB Standard).
Loop through output	Smart Card Interface:

Input/output connector IEC female / IEC male
RF input frequency	470 to 862 MHz
RF input power level	-77 dBm	Front panel
RF impedance	75 Ω
Frequency range	Loop through 47 to 864MHz General data
Frequency range	Re-modulator 470 to 862 MHz Article code
Output channel	UHF CH 21-69
Preset channel	43
Output signal	PAL B/G

Interface for one card according to ISO 7816 Supports embedded descrambler Viaccess.

4x7 segment numeric LED display,

Buttons: ,▼ ▲ ,, OK, EXIT, MENU.

The model code, variant and serial number, are located on a label on the underside of the housing.

TV SCART			Supply voltage				230 V AC ± 15%, 50-60 Hz
Video output		1 Vpp (± 1 dB) / 75 Ω
			Power consumption max				15 W
Audio output		0,5 Vrms / RL >10 kΩ
			Power consumption in
RGB output		Internal RGB or from
			standby				5,5 W
		AUX SCART
			Operating temperature				+5° C to +45° C
RGB bandwidth		5,8 MHz ± 3 dB
			Storage temperature				- 40° C to +65° C
Fast blanking output		Internal or from
			Humidity				25 to 90 % rel humidity
		AUX SCART
			Operating distance for
Status output		0/6/12 V / RL 10 kΩ
			remote control				max 10 meters
AUX SCART		1 Vpp (± 1 dB) / 75 Ω	Dimensions (w x d x h)				380 x 240 x 65 mm
Video output			Weight				1,8 kg approx
Video input		1 V pp / 75 Ω
Audio output		0,5 Vrms / RL >10 kΩ
Audio input		0,5 Vrms / RL >10 kΩ	SCART-sockets
Status input		0/6/12 V / RL >10 kΩ	1	TV		AUX
Fast blanking input		0/2 V for RGB, bypass to		Audio out right ch.		Audio out right ch.
		TV SCART	2	-		Audio in right ch.
RGB input		Yes	3	Audio out left ch.		Audio out left ch.
DIGITAL AUDIO (S/PDIF)			4	Audio ground		Audio ground
			5	RGB blue ground		RGB blue ground
Connector		1 x RCA
			6	-		Audio in left ch.
AUDIO R L			7 RGB blue signal out			RGB blue signal in
Connector		2 x RCA (R+L)	8	Switch voltage out		Switch voltage in
Output		0,5 Vrms ± 0,5 dB/ RL 10 kΩ	9	RGB green ground		RGB green ground
SERIAL (RS 232) Serial data			10	Connect to pin 10 in AUX scart
			11	RGB green signal out RGB green signal in
Connector	9-pin D-sub male
			12	-	-
Signals	RS232, max. 115,2 kbit/s
			13	RGB red ground		RGB red ground
Pin 1 DCD	(Data carrier detect) not connected
			14	Fast blank. ground		Fast blank. ground
2 RXD	(Receive data)		15 RGB red signal out			RGB red signal in
3 TXD	(Transmit data)
			16	Fast blanking out		Fast blanking in
4 DTR	(Data terminal ready) Set to high
			17	Video out ground		Video out ground
5 GND	(Signal ground)
			18	-		Video in ground
6 DSR	(Data set ready) not connected
			19	Video out		Video out
7 RTS	(Ready to send)
			20	-		Video in
8 CTS	(Clear to send)
			21	Ground (casing)		Ground (casing)
9 RI	(Ring indicator) not connected
TELEPHONE Return channel, Telephone line
Connector		Modular jack 6-pin
Protocol		V32 bis, 14400 baud		20				2
				21					1

GB 32