Nokia BH-100 manual Battery information, Clear settings or reset

Models: BH-100

1 10
Download 10 pages 24.23 Kb
Page 7
Image 7
Clear settings or reset

the answer/end key twice while no call is in progress.

If your phone supports voice dialing with the headset, press and hold the answer/end key when no call in progress, and proceed as described in the user guide of your phone.

To answer or end a call, press the answer/end key. To reject an incoming call, press the answer/end key twice.

To adjust the headset volume during a call, use the volume keys on your phone.

To switch the call between the headset and a compatible phone, press and hold the answer/end key.

Clear settings or reset

To clear the pairing settings from the headset, switch off the headset, and press and hold the power key and the answer/end key until the red and green indicator lights start to alternate.

To reset the headset if it stops functioning, although it is charged, plug the headset into a charger, and press the power key and the answer/end key at the same time.

Battery information

Your device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with Nokia approved chargers designated for this device.

Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time.

7

Page 7
Image 7
Nokia BH-100 manual Battery information, Clear settings or reset