ENGLISH
device to also play music through the headset.
If your mobile device does not support the A2DP profile, you can separately pair the headset with the mobile device and a music player that supports this profile. If you have paired and connected the headset with your mobile device, disconnect the headset from it before pairing the headset with the music player.
1.Ensure that your mobile device or music player is switched on and the headset is off.
2.Press and hold the power key (for about 5 seconds) until the blue indicator light starts to flash quickly.
3.Within about 3 minutes, activate the Bluetooth feature on your device, and set it to search for Bluetooth devices.
4.Select the headset from the list of found devices.
5.If necessary, enter the passcode 0000 to pair and connect the headset to your device. If your device does not have a keypad, it may use this passcode by default.
In some devices, you may need to make the connection separately after pairing.
When the headset is connected to your device and is ready for use, the blue indicator light flashes slowly.
You can pair the headset with up to eight devices but connect it to only one device supporting the HFP profile and another device supporting the A2DP profile at a time.
To manually connect the headset to the last used device that supports the HFP profile (for example, after connection loss), switch the headset off and on, or press and hold the
