•Date format and Date separator — Define the date
format and separator.
•Time format and Time separator — Select whether
to use the 12-hour or 24-hour clock system and with
which symbol to separate hours and minutes.
•Clock type — Define the clock type.
•Clock alarm tone — Select the tone for the alarm clock.
•Alarm snooze time — Define the snooze time for the
alarm clock.
•Workdays — Define the days of the week that are work
days for you.
•Automatic time update — Update the time, date, and
time zone information automatically (network service).
Common accessory settings
Select Menu > Ctrl. panel > Settings and General >
Enhancement.
With most accessories, you can do the following:
To define which profile is activated when you attach an
accessory to your device, select the accessory and Default
profile.
To set the device to answer phone calls automatically after
5 seconds when an accessory is attached, select
Automatic answer > On. If the ringing type is set to
Beep once or Silent in the selected profile, automatic
answering is disabled.
To illuminate the device while it is attached to an
accessory, select Lights > On.
Turn to silence calls or alarms
When you activate the sensors in your device, you can
control certain functions by turning the device.
Select Menu > Ctrl. panel > Settings and General >
Sensor settings.
Select from the following:
•Display rotation — Set the display to rotate
automatically according to the device's orientation.
•Turning control — Set the device to silence incoming
calls or snooze alarms when you turn the device face
down.
Security settings

About security settings

Select Menu > Ctrl. panel > Settings and General >
Security.
Define the following security settings:
•Phone and SIM card — Adjust the security settings for
your device and SIM card.
•Certificate management — Manage your security
certificates.
•Protected content — Adjust your settings for DRM-
protected content.
•Security module — Manage your security module.
Avoid using codes that are similar to emergency numbers
to prevent accidental dialling of the emergency number.
Codes are shown as asterisks. When you change a code,
enter the current code, then the new code twice.
135
Settings