Call settings
Select Menu > Ctrl. panel > Settings and Phone >
Call.
Select from the following:
•Send my caller ID — Display your phone number to
the person you are calling.
•Send my internet call ID — Display your net call
address to the person you are calling using a net call.
•Call waiting — Set t he de vi c e t o n ot if y yo u o f i n co mi ng
calls while you are in a call (network service).
•Internet call waiting — Set the device to notify you
of a new incoming internet call while you are in a call.
•Internet call alert — Select On to set your device to
alert for incoming internet calls. If you select Off, you
receive only a notification if you missed a call.
•Reject call with message — Reject a call, and send a
text message to the caller.
•Message text — Write the standard text message that
is sent when you reject a call.
•Own video in recvd. call — Allow or deny video
sending during a video call from your device.
•Image in video call — Display a still image if video is
not sent during a video call.
•Automatic redial — Set your device to make a
maximum of 10 attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialling,
press the end key.
•Show call duration — Display the length of a call
during the call.
•Summary after call — Display the length of a call after
the call.
•Speed dialling — Activate speed dialling.
•Anykey answer — Activate anykey answer.
•Line in use — This setting (network service) is shown
only if the SIM card supports two subscriber numbers,
that is, two phone lines. Select which phone line you
want to use for making calls and sending text
messages. Calls on both lines can be answered
irrespective of the selected line. If you select Line 2 and
have not subscribed to this network service, you are not
able to make calls. When line 2 is selected, is
displayed in the home screen.
•Line change — Prevent line selection (network
service), if supported by your SIM card. To change this
setting, you need the PIN2 code.
Network settings
Select Menu > Ctrl. panel > Settings and Phone >
Network.
To select the network mode, select Network mode and
Dual mode, UMTS, or GSM. In dual mode, the device
switches automatically between networks.
Tip: Selecting UMTS enables faster data transfer,
but may increase the demand on battery power and
reduce the battery life. In regions close to both GSM
and UMTS networks, selecting Dual mode may
cause constant jumping between the two networks,
which also increases the demand on battery power.
To select the operator, select Operator selection and
Manual to select from available networks, or Automatic
to set the device to select the network automatically.
To set the device to indicate when it is used in a
microcellular network (MCN), select Cell info display >
On.
137
Settings