The device creates a voice tag for each profile. To activate
a profile using a voice command, press and hold the mute
key in the home screen, and say the name of the profile.
To change the voice command, select Profiles >
Options > Change command.

Voice command settings

Select Menu > Ctrl. panel > Phone > Voice comm..
Select Options > Settings and from the following:
•Synthesiser — Activate the synthesiser that plays
recognised voice commands.
•Playback volume — Adjust the speech volume.
•Recognition sensitivity — Adjust the voice command
recognition sensitivity.
•Command verification — Select whether the voice
commands are accepted automatically, manually, or by
voice verification.
•Remove voice adapts. — Reset voice recognition
learning when the main user of the device has changed.
Push to talk
Some features may not be available in your region. Please
check the availability with local operator.
Select Menu > Applications > PTT.

About push to talk

Push to talk (PTT) (network service) is a real-time voice-
over-IP service that uses the cellular network. PTT provides
direct voice communication, with the push of a key. Use
PTT to have a conversation with one person or with a
group of people.
Before you can use PTT, you must define the PTT settings
(access point, PTT, SIP, XDM, and Presence). You may
receive the settings in a special text message from the
service provider that offers the PTT service. You can also
use the Settings wizard application to configure PTT, if
supported by your service provider. For more information
on the PTT application, see the user guide for your device
or your local Nokia website.
In PTT communication, one person talks while the others
listen through the built-in loudspeaker.
Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the volume may
be extremely loud.
Speakers take turns responding to each other. Because
only one group member can talk at any time, the
maximum duration of a speech turn is limited. The
maximum duration is usually set to 30 seconds. For details
of the speech turn duration for your network, contact your
service provider.
Phone calls always take priority over push to talk activities.

Log in and exit PTT

When you start the push to talk (PTT) service, you are
automatically logged in and connected to the channels
that were active the last time you closed the application.
If the connection fails, to attempt to log in again, select
Options > Log in to PTT.
60
Phone