Date and time settings
Select Menu > Control panel > Settings and General >
Date and time.
Select from the following:
•Date and Time — Set the current date and time.
•Time zone — Define your time zone.
•Automatic time update — Update the time, date, and
time zone information automatically (network service).
•Time format and Time separator — Select whether
to use the 12-hour or 24-hour clock system and with
which symbol to separate hours and minutes.
•Date format and Date separator — Define the date
format and separator.
•Clock type — Define the clock type.
•Clock alarm tone — Select the tone for the alarm clock.
•Workdays — Define the days of the week that are work
days for you.
Common accessory settings
Select Menu > Control panel > Settings and General >
Enhancement.
With most accessories, you can do the following:
To define which profile is activated when you attach an
accessory to your device, select the accessory and Default
profile.
To set the device to answer phone calls automatically after
5 seconds when an accessory is attached, select
Automatic answer > On. If the ringing type is set to
Beep once or Silent in the selected profile, automatic
answering is disabled.
To illuminate the device while it is attached to an
accessory, select Lights > On.
Sensor settings
Select Menu > Control panel > Settings and General >
Sensor settings.
To set the display to rotate automatically according to the
device's orientation, select Display rotation.
To set the device to silence an incoming call or snooze an
alarm when you tap the device twice, select Tap to
silence.
To set the device to silence an incoming call or snooze an
alarm when you turn the device face down, select Turn to
silence.
Security settings

About security settings

Select Menu > Control panel > Settings and General >
Security.
Define the following security settings:
•Phone and SIM card — Adjust the security settings for
your device and SIM card.
•Certificate management — Manage your security
certificates.
•Security module — Manage your security module.
Avoid using codes that are similar to emergency numbers
to prevent accidental dialling of the emergency number.
Codes are shown as asterisks. When you change a code,
enter the current code, then the new code twice.
144
Settings