Nokia M2M PLATFORM 6.CONFIGURATOR SW

6.CONFIGURATOR SW

The Configurator software is an accessory product for Nokia GSM Connectivity Terminals. It is used to modify the basic settings of the terminal so that the connection to the GW can be established. The following settings can be configured:

•GSM security settings

•GSM network settings

•GSM WAP parameter settings

A PC or laptop and an RS-232 serial cable are needed when configuring the terminal.

One of the Nokia GSM Connectivity Terminals used with the Nokia M2M ADK is used as a data modem in the server side and the other one is used in the M2M system mode at the terminal end connected to the evaluation module. Instructions on how to configure these terminals can be found in the Installation Guide for Nokia M2M Application Development Kit that is included in the Nokia M2M ADK documents.

15/21

Contents

Page Page Page Page ACRONYMS AND TERMS REFERENCES 1.ABOUT THIS DOCUMENT 2.INTRODUCTION 2.1 NOKIA M2M PLATFORM 2.2 OTHER NOKIA M2M PLATFORM PRODUCTS 2.2.1 Nokia M2M Gateway editions.Nokia 30 GSM Connectivity Terminal 3.NOKIA M2M ADK PRODUCT CONCEPT AND USAGE Page 4.EVALUATION MODULE 4.1 INTERFACES 4.1.1 M2M system interface 4.1.2 Power interface 4.1.3 Service interface 4.1.4 RS-232 4.1.5 Digital output interface 4.1.6 Digital input interface 4.1.8 Tracing interface 4.2 SW FEATURES 4.2.1 ORB SW module 4.2.2 System protocol SW module 4.2.3 OS & HW wrappers 4.3 MECHANICS 5.NOKIA M2M GATEWAY TRIAL VERSION 5.1 FEATURES 5.1.1 Bearers 5.1.2 Traffic Optimisation 5.1.3 Messaging Reliability 5.2 SYSTEM REQUIREMENTS Table 1. Nokia M2M Gateway Trial Version system requirements Product Operating Hardware Memory 6.CONFIGURATOR SW 7.APPLICATION EXAMPLES 7.1 EVALUATION MODULE CONTROL APPLICATION 7.2 TERMINAL END APPLICATIONS 7.3 SERVER END EXAMPLE1 AND EXAMPLE2 APPLICATIONS 7.4 REMOTE I/O CONTROL APPLICATION 8.M2M TRACER 9.IDL COMPILER 10. DOCUMENTATION 11. SALES PACKAGE