Stereo/Nav Unit
Power Cable
(Not Included)
black wire— ground
connection
Stereo/Nav Unit Cradle
(Not Included)
stereo audio source MP3, iPod, Sat Radio, etc. (not included)
6-pin brown plug
3.5mm plug
Radar Detector
Optional
J&M Plug-and-Play
Radar Detector
Connection Harness
(Not Included)
ground to frame—black wire
red wire— power
connectionfuse
holder
5 amps
12v switchable—red wire
black 2-pin plug
MA-967
black
2-pin plugs
radar connection
female 6-pin din
driver's helmet headset (not included)
Installation
1)Mount the MA-967 amplifier where desired in the left side of your fair- ing or in a convenient location using the provided screws and nuts, dou- ble back tape, and/or tie straps. Take into account the length of the wires going to all of the components prior to mounting.
2)Using the supplied butt connectors, connect your Stereo/NAV unit power harness to the red and black wires from the MA-967 amplifier. Plug the 2.5mm mono and the 3.5mm stereo plugs from the MA-967 to your music source or Stereo/NAV unit. Connect the brown 6-pin plug from the harness to the brown 6-pin plug from the MA-967 amplifier.
(See Diagram) Note: The MA-967 amplifier can be used with your per- sonal music device for stereo audio amplification into the drivers hel- met headset. Simply plug the 3.5mm plug from the connection harness into your music device and not use the 2.5mm mono plug.