Nokia MA-967 installation instructions Operation - Cell Phone

3)Using one of J&M's Plug and Play radar harnesses, connect your radar detector to the proper plugs from the MA-967 amplifier. (See Diagram) Note: It is not necessary to use the radar detector cable option for proper operation of this audio system.

4)Route the headset lead from the MA-967 amplifier to the left handle- bar or to a convenient location on your motorcycle, to allow convenient connection of your helmet headset.

5)Connect the power wire (with fuse holder) to a switchable power source or accessory terminal, so that the amplifier is turned off when the ignition is turned off. Connect the black wire to a good frame ground (not to the battery negative).

Operation - Cell Phone

This integration terminal can utilize the available Bluetooth cell phone link built into many of today’s Stereo/NAV units, for hands free cell phone operation through a single helmet headset. (See operation manual for your particullar Stereo/NAV unit.)

Operation - Radar/Audio

The beeps/braps from the radar detector will be heard in one speaker of the helmet headset if so installed.

The volume levels of each of your Stereo/NAV unit’s audio functions (stereo music/GPS route commands, etc.) can be adjusted individually using the controls built into your particular Stereo/NAV unit.

Thank you for the confidence you have shown by purchasing one of J&M’s innovative products. If you have any questions during installation, or require further assistance, you may call us at 1-800-358-0881 from 8:00 a.m. to 5:00 p.m. Mountain Standard Time, Monday through Friday.

Tucson, Arizona, U.S.A.

Tel: (800) 358-0881

Website: http://www.jmcorp.com

E-mail: audio@jmcorp.com