Nokia N92 Receive RealPlayer settings, Change the RealPlayer settings, Proxy sett, Netw. sett

Media applications

38

In RealPlayer, you can only open an rtsp:// URL address. However, RealPlayer recognizes an http link to a .ram file.

To stream content over the air, select a streaming link saved in Gallery, on a web page, or received in a text message or multimedia message. Before live content begins streaming, your device connects to the site and starts loading the content. The content is not saved in your device.

Receive RealPlayer settings

You may receive RealPlayer settings in a special text message from the service provider. See ‘Data and settings’, p. 48. For more information, contact your service provider.

Change the RealPlayer settings

Select Options > Settings and from the following:

Video—to have RealPlayer automatically repeat video clips after they finish playing

Connection—to select whether to use a proxy server, change the default access point, and set the port range used when connecting. Contact your service provider for the correct settings.

Proxy sett.:

Use proxy—To use a proxy server, select Yes.

Proxy serv. address—Enter the IP address of the proxy server.

Proxy port number—Enter the port number of the proxy server.

Glossary: Proxy servers are intermediate servers between media servers and their users. Some service providers use them to provide additional security or speed up access to browser pages that contain sound or video clips.

Netw. sett.:

Default access point—Scroll to the access point you want

to use to connect to the internet, and press .

Online time—Set the time for RealPlayer to disconnect from the network when you pause a media clip playing

through a network link. Select User defined, and press . Enter the time, and select OK.

Lowest UDP port—Enter the lowest port number of the server’s port range. The minimum value is 1024.

Highest UDP port—Enter the highest port number of the server’s port range. The maximum value is 65535.

Select Options > Advanced settings to edit the bandwidth values for different networks.