Nokia N92 manual Create contact groups, Remove members from a group

Contacts (Phonebook)

58

When you use Fixed dialling, packet data connections are not possible, except when sending text messages over a packet data connection. In this case, the message center number and the recipient’s phone number must be included on the fixed dialing list.

When fixed dialing is activated, calls may be possible to the official emergency number programmed into your device.

Add ringing tones for contacts

When a contact or group member calls you, the device plays the chosen ringing tone (if the caller’s telephone number is sent with the call and your device recognizes it).

1Press to open a contact card or go to the groups

list, and select a contact group.

2Select Options > Ringing tone. A list of ringing tones

opens.

3Select the ringing tone you want to use for the individual contact or the selected group.

To remove the ringing tone, select Default tone from the list of ringing tones.

Create contact groups

1In Contacts, press to open the groups list.

2 Select Options > New group.

3 Write a name for the group or use the default name Group , and select OK.

4 Open the group, and select Options > Add members.

5 Scroll to a contact, and press to mark it. To add multiple members at a time, repeat this action on all the contacts you want to add.

6 Select OK to add the contacts to the group.

To rename a group, select Options > Rename, enter the new name, and select OK.

Remove members from a group

1In the groups list, open the group you want to modify.

2 Scroll to the contact, and select Options > Remove from group.

3 Select Yes to remove the contact from the group.

Tip! To check to which groups a contact belongs, scroll to the contact, and select Options > Belongs to groups.