■CAMERA TITLE
500 CAMERA TITLE | 1 of 2 | |
SWITCHER=MASTER(2 of 2) |
| |
CAM LCN TITLE |
| |
1 |
| |
2 |
| |
3 |
| |
4 |
| |
5 | 17 |
|
6 | 18 |
|
7 | 19 |
|
8 | 20 |
|
LCN:LOGICAL CAMERA NUMBER |
| |
|
| |
|
| |
500 CAMERA TITLE | 2 of 2 | |
SWITCHER=MASTER(2 of 2) |
| |
CAM LCN TITLE |
| |
9 | 21 |
|
10 | 22 |
|
11 | 23 |
|
12 | 24 |
|
13 | 25 |
|
14 | 26 |
|
15 | 27 |
|
16 | 28 |
|
LCN:LOGICAL CAMERA NUMBER
2.After the configuration, press the MON (ESC) button. The monitor display will return to the previous menu.
After all the configurations, press the SETUP button while holding down the SHIFT button. The configuration will be updated when closing SETUP MENU.
Notes:
•When moving the joystick to ▼ at the bottom of CAM- ERA TITLE 1 of 2, the monitor will display 2 of 2 (the next page).
•When moving the joystick to ▲ at the top of CAMERA TITLE 2 of 2, the monitor will display 1 of 2 (the previous page).
• Original characters are configurable through WJ- SX150A Administrator Console, but they are not dis- played correctly in SETUP MENU. They are displayed as ■. (Refer to p. 95 Edit Font window.)
•The titles of the camera channels deactivated by the
●How to Display
To display this menu on the monitor, move the cursor to 500 CAMERA TITLE in SETUP MENU by moving the joystick to
▼or ▲. Then, press the CAM (SET) button. The submenu appears on the monitor.
●How to edit
Move the joystick to move the cursor.
To select parameters, press the PREV or NEXT button. SWITCHER: Select a unit (SLAVE1 to 4 and MASTER*)
to configure the parameters.
*In normal connection, only MASTER is displayed. CAM: This stands for a camera channel of the unit. LCN: This stands for a logical camera number. 1 to 99
is selectable.
TITLE: A camera title is composed of up to 20 charac- ters. Each camera number is fixed and the subse- quent 20 characters are editable.
The characters available here are the following: ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrs
The factory default settings are same as the illustrations.
1.Edit the camera titles by pressing the NEXT or PREV buttons.
The NEXT button toggles these characters in this order. The PREV button toggles these characters in a reverse order.
Joystick and the CLEAR button are also usable for the edit. (Refer to p. 63 Displaying SETUP MENU for each use.)
■RECORDER
600 | RECORDER |
|
|
|
|
| CONTROL | ADR | EXT IN |
610 | MASTER |
|
| |
620 | SLAVE1 | HD100 | 01 |
|
630 | SLAVE2 | OFF |
| GENLOCK OFF |
640 | SLAVE3 | VCR |
|
|
650 | SLAVE4 | HD500 | 01 | GENLOCK OFF |
DATA BIT | 7bit |
PARITY BIT | ODD |
STOP BIT | 1bit |
BAUD RATE | 9600bps |
COMM PORT | SERIAL PORT |
●How to Display
To display this menu on the monitor, move the cursor to 600 RECORDER in SETUP MENU by moving the joystick to D or C. Then, press the CAM (SET) button. The submenu will appear on the monitor.
●Parameters
Move the joystick to move the cursor.
Press the NEXT or PREV button to select the desired para- meters.
Press the numeric button(s) to enter a number.
•610 MASTER/620 SLAVE1/630 SLAVE 2/640 SLAVE 3/650 SLAVE 4
This stands for the type of units connected in the sys- tem.
CONTROL: This stands for the recorder connected to each unit. The selectable parameters will differ depending on whether a Multiplexer board is installed in the unit.
71
