MONITOR DISPLAY CONTROL
Note: This section describes the terminal mode. To operate in the PS·Data mode, refer to p. 35.
■On-screen Display (OSD) Control
The procedure described below lets you determine the dis- play parameters, such as camera title, clock and status, on and off on the active monitor screen.
Before controlling each item, monitor selection is neces- sary. (Refer to p. 3 Monitor Selection.)
●Displaying All the Items
1.Perform Step 1 of Displaying Each Item.
2.Hold down the SHIFT button.
The LCD display will become as follows.
OSD Position | 003 |
All |
|
3.Press the F1 button.
(1), (2), (3), and (4) will appear/disappear on/from the active monitor.
(1)
08/21/2002 12:50:28 PM
M1 K1 T01
(2)
C01 camera title
●Displaying Each Item
ALARM10*
■On-screen Display (OSD) Position Control
The procedure described below lets you determine the dis-
(4)play positions, such as camera title, clock and status, on
the active monitor screen.
(3)
Clock
08/21/2002 12:50:59 PM 
1.Press the MENU button repeatedly until "OSD On/Off" appears on the LCD.
OSD On/Off | 002 |
Clock Cam Event Mon
2.Perform desired operations. q Displaying the clock Toggle the F1 button.
(1)will appear/disappear on/from the active moni-
tor.
wDisplaying the camera title Toggle the F2 button.
(2)will appear/disappear on/from the active moni-
tor.
eDisplaying the event Toggle the F3 button.
(3)will appear/disappear on/from the active moni-
tor.
rDisplaying the monitor status* Toggle the F4 button.
(4)* will appear/disappear on/from the active moni-
tor.
*Monitor number, system controller name, tour num- ber and recorder number
3.To exit the mode, press the MON (ESC) button.
| M1 | K1 | T01 |
|
|
|
|
|
|
| |
| C01 | camera |
| title |
|
|
| ALARM10* | |||
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
| ||
Camera title |
|
|
|
|
|
| Event | ||||
|
|
|
| Monitor status |
|
| |||||
●Moving Each Item
1.Press the MENU button repeatedly until "OSD Position" appears on the LCD.
OSD Position | 003 |
Clock Cam Event Mon
11
