![](/images/new-backgrounds/1205226/205226257x1.webp)
• Record List/Thumbnail Display
You can operate the Record List or Thumbnail Display by referring to the recorder’s operating instructions. In addi- tion, the following operations from the system controllers are also available.
• Record List
| DATE MAY29.00 |
| ALL GROUP | ||
| NO | GROUP |
| TIME | |
000010009 | G2 | 23:59:59 | T/L | ||
000010008 | G1 | 22:15:40 | M/S | ||
000010007 | G3 | 21:00:07 | O/S | ||
000010006 | ALL | 17:33:05 | T/L | ||
000010005 | ALL | 7:23:11 | T/L EMR | ||
000010004 | G4 | 6:59:44 | M/S | ||
000010003 | ALL | 8:55:28 | T/L MAN | ||
000010002 | G3 | 0:01:28 | T/L | ||
|
|
| (TOTAL | 2343RECORD) | |
| SEARCH: MAY29.00 | 0:01 G1 | |||
| ALARM # SEARCH:[DISPLAY] |
| |||
| SEL:←→ | CHG:+– | EXE:SET | ESC:FSTOP | |
|
|
|
|
|
|
Search Editing Area
• Thumbnail Display
000010009 000010008 000010007 000010006
000000013 000000012 000000011 000000010
SEARCH MAY29.00 | 0:01 G1 |
000000009 000000008 000000007 000000006
000000005 000000004 000000003 000000002
Search Editing Area
Joystick to UP (D): Moves the cursor up.
Joystick to DOWN (C): Moves the cursor down.
Joystick to L (A): Moves the cursor to the left.
Joystick to R (B): Moves the cursor to the right.
CAM(SET) button: Displays the search editing area./Starts the search after you enter the search condition.
MON(ESC)button: Cancels the search editing area and returns to the Record List or Thumbnail Display.
NEXT button: Increments a parameter.
PREV button: Decrements a parameter.
PLAY button: Starts the playback of a record pointed by the cursor.
Note: The PLAY button is deactivated in the search editing area.
●Electronic Zooming (EL-ZOOM)
Playback images can be electrically zoomed besides a camera's optical zooming.
1.Enter the recorder mode (Refer to p. 131 Recorder Mode.)
2.Press the PLAY button.
3.Press the numeric button corresponding on the desired camera number to display the spot picture.
4.Press the CAM (SET) button.
The selected camera’s picture is displayed in the spot mode.
5.Each time the button 4 and the SHIFT button are pressed, the zooming range are changeable as follows:
2x → 4x → 8x → | 1x → | 2x |
|
| |
|
| UP |
|
|
|
| L |
| R |
|
|
|
| DOWN |
|
|
|
F2 | GROUP SEQ | TOUR SEQ | T&D | CAM ID | EVENT |
INDEX | REW/FF | STILL | AUX1 OFF | AUX1 ON | |
| PREV | NEXT | MON STATUS | ALL |
|
RECORDER | STEP |
| AUX2 OFF | AUX2 ON | |
STOP |
| PAUSE | ALM H | VLD H | SYS S |
STOP | PLAY | PAUSE | SEQUENCE | DEF OFF | DEF ON |
| OSD |
| MON (ESC) |
| CAM (SET) |
SETUP |
| SHIFT | MON LOCK | MULTI SCREEN SEL | WIPER |
6.To return the zooming range to x 1, press the button 4 while holding down the SHIFT button again.
7.To return to the multiscreen display, press the button 0 while holding down the SHIFT button.
Note: You can move the zoomed area on the monitor with the joystick after Step 5.