Panasonic WJ-SX 150A manual 119, Resetting the Alarm Inputs, Suspending the Alarm Inputs

■Resetting the Alarm Inputs

There are two alarm reset functions:

•Alarm reset (resetting the alarm inputs per monitor)

•Alarm all reset (resetting all the alarm inputs)

●Alarm Reset

RESET
ALL RESET
TOUR SEQ	T&D	CAM ID	EVENT
	STILL	AUX1 OFF	AUX1 ON

1.Select a monitor which displays "ALARM".

2.To reset the alarms, press the RESET button. "ALARMnn" will disappear from the selected moni- tor.

When alarms have been reset from all the monitors, the LED display and indicators of system controllers will work as follows for recovery.

•The LED display will return to the state before the alarm input.

•The alarm indicator will go out.

•The CAM indicator will return to the state before the alarm input.

Note: When more than one alarm is input and they are associated with the same monitor, they cannot be reset one by one.

●Alarm All Reset

1.Press the RESET button while holding down the SHIFT button.

RESET
ALL RESET
TOUR SEQ	T&D	CAM ID	EVENT
	STILL	AUX1 OFF	AUX1 ON
NEXT	MON STATUS	ALL
	EL-ZOOM	AUX2 OFF	AUX2 ON
PAUSE	ALM H	VLD H	SYS S
PAUSE	SEQUENCE	DEF OFF	DEF ON
	MON (ESC)		CAM (SET)
SHIFT	MON LOCK	MULTI SCREEN SEL	WIPER

2.The monitor, the LED display and the indicator will change as follows:

"ALARMnn" will disappear from all the monitor.

The LED display will return to the state before the alarm input.

The alarm indicator will go out.

The CAM indicator will return to the state before the alarm input.

■Suspending the Alarm Inputs

Use this function when you do not want to be disturbed by an alarm input, for example, during the setup procedures.

ACK	RESET
SUSPEND	ALL RESET
GROUP SEQ	TOUR SEQ	T&D	CAM
REW/FF		STILL	AUX1 O
PREV	NEXT	MON STATUS ALM SUSPENDED
STEP		EL-ZOOM	AUX2 O
	PAUSE	ALM H	VLD
PLAY	PAUSE	SEQUENCE	DEF O
OSD		MON (ESC)
	SHIFT	MON LOCK	MULTI SCRE

1.Press the ACK/SUSPEND button while holding down the SHIFT button.

"ALM SUSPENDED" will appear on the monitor.

2.To cancel alarm suspension, press the ACK/SUSPEND button while holding down the SHIFT button again. "ALM SUSPENDED" will disappear from the monitor.

Notes:

•An alarm continues to operate even after it is suspend- ed.

•If you suspend an alarm while an alarm image is dis- played, "ALM SUSPENDED" will not appear on the moni- tor. Reset the alarm, and then suspend it again.

119