Mon4 Cam HD500, System Setup 501 Off | Panasonic WJ-SX 150A manual

WJ-HD500 SERIES CONTROL (TERMINAL MODE)

Matrix switcher can control Digital Disk Recorder WJ- HD500 Series. The following is the procedure of WJ-HD500 Series SETUP MENU.

Notes:

•The following operating procedures are for the terminal mode. If you are using a PS·Data system controller, refer to p. 36.

•When a Multiplexer board is installed in the matrix switch- er, you can neither connect nor control a WJ-HD500 Series recorder. You need to remove the board from the matrix switcher.

■Displaying WJ-HD500 Series

SETUP MENU

To display WJ-HD500 Series SETUP MENU, follow the pro- cedure below.

1.Confirm that WJ-HD500 Series is correctly and securely connected.

2.Select the desired monitor. (Refer to p. 3 Monitor Selection.)

3.Enter the recorder mode. (Refer to p. 19 Recorder Mode.) Then, the selected monitor number, recorder number, and "/HDnnn" will appear on the LCD.

Mon4 Cam--	R4
	/HD500

4.Press the MENU button repeatedly until “System Setup” appears on the LCD.

System	Setup	501
On	Off

5.Press the F1 button.

WJ-HD500 Series SETUP MENU will appear on the active monitor, and “B” mark will light up beside “On”.

System Setup	501
5On Off

6.Perform the camera setting while watching the setup menu on the monitor.

The following functions and buttons are valid in SETUP MENU.

<Main unit>

JogDial clockwise: Increments a parameter.

JogDial counterclockwise: Decrements a parameter.

CAM (SET) button: Executes the selections and dis- plays a submenu.

+button: Increments a parameter.

– button: Decrements a parameter.

MON (ESC) button: Returns to SETUP MENU or the previous menu.

<3D joystick unit>

3D joystick upward (D): Moves the cursor up.

3D joystick downward (C): Moves the cursor down.

3D joystick leftward (A): Moves the cursor to the left.

3D joystick rightward (B): Moves the cursor to the right.

6.To end the setting and return to the normal view, press the F2 button while SETUP MENU is displayed. "B" mark will disappear from the LCD.

18

Image 190

Panasonic WJ-SX 150A manual Mon4 Cam HD500, System Setup 501 Off, System Setup 501 5On Off

Contents

Operating Instructions English Version Important Safety Instructions Contents 103 123 Features Preface Precautions Document Convention Features of the Matrix Switcher System Monitoring Mode Matrix Switcher System DescriptionsCrosspoint Switches Spot Mode About System Controller Sequence ModeSystem Control Camera control Example of a System with Basic Functions Matrix switcher Monitor Log-in/Log-out Terminal Mode DescriptionsOperator Registration Information Displayed on the Monitors Monitor-related FunctionsMonitor Selection Display Position Camera Selection Operating Zoom Lens Housing ControlCamera-related Functions Pan/Tilt Head Control External Equipment Control Alarm-related FunctionsCamera Cleaning Controllable Camera-related Functions Timer Event Extended Functions Setup ProceduresSystem Status Table Recorder Connection Multiscreen display Alarm priority modeMultiplexer Board Function Zoom Master-slave Connection Motion detector Notification about PS·DATA Controller Operation Detailed Product Description Mode selector Mode WJ-SX150A Matrix SwitcherOperation indicator Operate Front View Rear View WV-CU360C/CU360CJ System Controller Terminal Mode Front View WV-CU360C Front View WV-CU360CJ #9Alarm Acknowledge button ACK/SUSPEND #2Call Preset button Call PRESET/PROGRAM#8Alarm Reset button RESET/ALL Reset $0Function 1 button F1/CAM Setup $5Previous button Prev 2Setup button Setup$4Next button Next $6Recorder button Recorder Rear View Installations and System Connections Installing the Multiplexer Board InstallationsMounting into the Rack System Expansion Connection System Connection ExamplesBasic System Connection This is an example of basic system connection Monitor Outputs Slave Connections Connection with the Camera Sites Connection for RS-485 Type Camera Home Run WiringDaisy Chain Wiring RS485 Port Connection with the Monitors Ated to Unit 1 to Specification of Recover Input 5 V DC / 0 V low- active DATA1 to DATA4 Port Connection with Digital Disk Recorder WJ-HD500 Series Connection with the Alarm OutputTo Confirm the Images from a Recorder Connected to the Unit To Record the Camera Images in Maximum Recording Rate EXT To Control a Recorder via the Network EXT Monitor OUT Connection with Digital Disk Recorder WJ-HD200 Series Screen OUT Data Data HDR Data bit 8 bits Parity check None Stop bit 1 bit Data HDR PortData HDR Port Connection with the Time-lapse VCR Panasonic Models Parity check ODD Stop bit 1 bit Cable Specifications AG6730, AG6740 RT850 Connection with the PC Time Adjustment with an External EquipmentMaster Clock Connection Example for Time Adjustment Following parameters are fixed. Data bit 8 bits Master-slave Connection Pattern 2 Master, Slave 1 and 2 are connected in the system Pattern 3 Master, Slave 1 to 3 are connected in the system Master Camera 49 to Unit Number Selection PreparationPattern 4 Master, Slave 1 to 4 are connected in the system Video Cable Connection Data Port Connection Connection between the Units and Cameras With Setup Menu Software SetupRecorder Setup With WJ-SX150A Administrator Console WJ-SX150A Setup Procedures Firmware Update of SX150A Program Writer Firmware UpdateInstallation of SX150A Program Writer Baud Rate Data Bit Parity None Stop Bit Wait until the following message appears Sdram Initialize COMPLETED.START LOAD- ING… Timeout Error Error ListFile Error Not Ready Master-Slave Connection Settings Setup ProceduresDescription of Setup Procedures Sequence Settings System Settings Alarm SettingsOperator Settings Setup File Operation Programming Setup Menu WJ-SX150A Setup Menu OSDDisplaying Setup Menu This is the factory default setting Month How to DisplayParameters Day · D. S. T.... Summer Time Press the numeric button to enter the correct year T. Daylight Saving TimeYear Press the numeric button to enter the correct time Alarm Setup Alarm Input Following is the setting procedure Serial Port LOW How to edit MASTER/620 SLAVE1/630 Slave 2/640 Slave 3/650 Slave Without the Multiplexer board When a digital disk recorder is connected Data BIT 8 bitWhen a time-lapse VCR is connected Data BIT 7 bit With the Multiplexer board When Master, Slave 1 and 2 are connected When only Master is connectedWhen Master and Slave 1 are connected Slave 1 to When Master, Slave 1 to 4 are connected When Master, Slave 1 to 3 are connectedSetting for normal connection Master unit setting for Master-Slave connection Factory default setting Operator Registration CAM 01 to CAM 1 to 16 = View & Control for Operator no to MUX Camera Title MUX Installation/Uninstallation WJ-SX150A Administrator ConsoleDescription of WJ-SX150A Administrator Console Installation Main Window Before Using WJ-SX150A Administrator ConsoleStartup/Termination Master-Slave CAM 1 to Logical Camera NumberSlave Logical Camera Number Put a file to SX150A Get a Configuration Data from SX150AFile name of the configuration data appears OK button Tour Sequence PresetDwell Group Sequence EnableSchedule Mode Group Mon 1 Mon Auto Cleaning Camera Camera CleaningCamera Auto Cleaning Saves the configuration and closes the Timer Event win- dow Daylight Saving Time/Summer Time Date Group Alarm Input Group Alarm ModeAlarm Mode Camera Mon Monitor Alarm EventSensitivity MUX LCN/Tour Operator Registration Alarm PortAlarm Port Num Operator Number Camera Access GroupLevel Table Add Operator Number Monitor Selection Auto Login/Logout Auto Log- in/Log-outAuto Login Box Auto Logout Box Clock How to displayTime & Date Display Format Cable Compensation/VD2/DATA Camera Title Edit Font Window Edit Camera TitleTo Edit a User Font Character Parameters Normal Connection Data PortParameters Master Recorder Control RecorderParameters Slave 1 to Unit Address Multiplexer Mode MUX Multi Monitor Out Group System Group Alarm GroupREC OUT Group Normal Group 100 Mux Alarm GroupMultiplexer Title MUX New Select Setup Data File101 Account Manager Edit Account Manager 102Communication Port Parameter Group 103 104 LOG-IN and LOG-OUTLog-in Auto Log-in 105Log-out Auto Log-out Priority Lock Monitor Selection and Camera Selection106 Applying Priority Lock 107 Camera Selection Lens Control Camera Control108 Pan/Tilt Control Call Preset Position Program Preset Position109 110 Camera SetupCamera Function Control Camera Function Shortcut Function Changing to Black and White Images 111Patrol Learn and Play 112 Camera Panning Function 113 Camera Site Accessories ControlCamera Housing Control Receiver Control Running Sequence 114 On-screen Display OSD Control Monitor Display Control115 On-screen Display OSD Position Control Moving the Event Display 116Moving the Camera Title Display Moving the Monitor Status 117 Alarm History TableVideo Loss History Table Operation of an Alarm-related Camera ACK Alarm ControlOperation during an Alarm Mode 118 Alarm All Reset Resetting the Alarm InputsSuspending the Alarm Inputs Press the Reset button while holding down the Shift button Monitoring the Camera Picture Multiscreen Segment Switching120 Multiscreen Sequence Still Playback Spot Picture 121Electronic Zooming EL-ZOOM 123 When Using a PS·DATA System Controller 124 Monitor Control 125 126 127 Suspending All the Alarm Inputs Resetting All the Alarm Inputs128 Expanded Function 129 130 WJ-HD500 Series Control Terminal ModeDisplaying WJ-HD500 Series 131 Recorder ModeTo return to the spot display, exit from the recorder mode Normal Playback Search Playback Stopping REC only Alarm Recording132 Manual Recording Record List 133Record List/Thumbnail Display Thumbnail Display Shift + Zoom Tele buttons Selects a group to be 134Other Operations Played back Displaying WJ-HD200 Series WJ-HD200 Series Control Terminal Mode135 Date-and-time Search Playback Alarm Recall table 136 137 Terminal ModeDisplaying WJ-HD100 Series 138 Fast-forward 139Controlling the Time-lapse VCR Rewind NON-PANASONIC Models Terminal Mode 140 Controlling the Recorder with a PS·Data System Controller WJ-HD500 Series Control PS·DATA141 Operations 142 WJ-HD200 Series Control PS·DATA 143 PS·DATA 144 Panasonic Models PS·DATA 145 146 NON-PANASONIC Models PS·DATA 147 Monitor Display When a Video Loss OccursCamera Switching Pulse Loss Display MUX Video Loss Display Troubleshooting 148 149 Figuration. Refer to p Put a file to 150 Appendix 151 Communication Protocol Transmission CommandResponse Command 152 153 Command TableTransmission Command Response Ascii Parameter Ascii Basic Operation Setup Control Alarm Control154 155 Camera Control Setup Menu 156 157 158 REW 159 Inquiry 160 Miscellaneous Control Error codeASCII Error type Meaning Error Code ListMatrix switcher and external devices 161 162 WorksheetsInstruction Master-Slave Checklist163 Logical Camera Number Master and Slave 1 to 164Camera Slave Tour Sequence Preset position Dwell time165 Tour Group Sequence Timer Event166 Group Monitor 167 Camera Auto CleaningAlarm Mode Daylight Saving Time Alarm Event 168 169 Alarm # Alarm Port N.C./Time Alarm Port170 171 Level Table Auto Log-in/Log-out 172Cable Compensation/VD2 Recorder 173Data Port Multiplexer 174 REC Out AlarmDynamic REC Optional Accessories SpecificationsStandard Accessories 175 2003 Setup Procedures Hardware Installations and ConnectionsBefore Operation Operation End Auto Logout Operation Start Auto LoginOperation End Logout Mon1 Cam03 Mon1 CamMon- Cam Prohibited Mon1 Cam03 Mon1 Cam04 Refer to p Camera Panning Function for how to oper- ate Mon1 Cam03 Pre48 Memory Mon1 Cam03 Pre05 Camera Setup 006 On Off Rst A.Rst Camera Setup 006 5On Off Rst A.Rst Auto Pan Setup 008 Play Rvrs Start End Auto Pan Setup and ActivationAuto Mode 009 Seq Sort Pan Patrol Patrol Learn 007 Start Stop BW Mode 010 On Off Auto1 Auto2 Camera Site Accessories Control Mon1 Cam07 T04P Mon1 Cam01 T04Mon1 Cam01 T01 OSD Position 003 All Displaying Each ItemMoving Each Item OSD On/Off 002 Clock Cam Event Mon Moving the Event Display Moving the clock displayMoving the Camera Title Display Moving the Monitor Status Alarm Recall History 004 Off Mon1 Cam01 AL01 Alarm ALM Suspended Mux Still 052 Input Still CH REC REC ALM System Setup 501 5On Off System Setup 501 OffMon4 Cam HD500 JogDial counterclockwise Backward field advance Mon4 Cam01 HD500 Search Mode /HD500 Edit Group AlmJogDial counterclockwise Skips to the next record 3D joystick to rightward B Moves the cursor to LeftRight System Setup 301 5On Off WJ-HD300 Series Control Terminal ModeSystem Setup 301 Off Displaying WJ-HD300 Series Search Mode /HD300 List Text Copy Nr-A Cp-A Cpy1 Cpy2 Search Mode /HD300 Thumb Text CopySearch Playback Recording event search VMD search Enter a camera number and time range Available controls and functions Main unit Marking search Thumbnail window Disk Selection Canceling FiltersRepeat Playback Playing the Latest Recorded Image Electronic Zooming EL-ZOOMSystem Function Marking WJ-HD200 Series Control Terminal Mode Electronic Zooming EL-ZOOM Terminal Mode Alarm Recall 1 Date Time ALM Panasonic Models Terminal Mode OSD On/Off 302 Clock Cam Event Mon Monitor Display Control PS·DATAHistory 303 Off WJ-HD500/300/200/100 Series Control PS·DATA Connection with Digital Disk Recorder WJ-HD300 Series Basic Connection To Control a Recorder and Cameras via the Network System controller Terminal Mode PS·Data Connection When the firmware of this unit is Ver .03 or later Settings of Administrator Console and Setup MenuosdWhen WJ-SX150A Administrator Console is Ver .03 or later Connection with Digital Disk Recorder WJ-HD220 Series Refer to p WJ-HD300 Series Control Terminal Mode WJ-HD300 Series Control WV-CU650 PS·DATA Filtering ON/OFF Text display ON/OFF Disk selection System functions Joystick Moves the cursor Next or Prev button Changes a parameter Enter a camera number and time range Available controls and functions Next or Prev button Moves the cursor WJ-HD300 Series Control WV-CU360C/CJ PS·DATA OFF Mark N0504-0 3TR002744AAA