
■Camera Selection
1.Select the desired monitor. (Refer to p. 106 Monitor Selection.)
2.Press the numeric buttons to select the desired camera number (1 to 99).
3.Press the CAM (SET) button.
The selected camera's image will appear on the active monitor. The CAMERA indicator will light up and the selected camera number will appear on the LED dis- play on the controller.
Note: If you select a wrong number, press the CLEAR button to clear the input.
4.If the selected camera number is not valid, the PRO- HIBITED indicator and the number on the LED display will blink for about 3 seconds.
Return to Step 2 and select a new camera number.
5.To replace the currently selected camera with the next
6.To replace the currently selected camera with the next
F1 | ACK | RESET |
CAM SETUP | SUSPEND | ALL RESET |
F2 | GROUP SEQ | TOUR SEQ |
INDEX | REW/FF | |
| PREV | NEXT |
RECORDER | STEP |
|
STOP |
| PAUSE |
STOP | PLAY | PAUSE |
| OSD |
|
SETUP |
| SHIFT |
Note: The PROHIBITED indicator will light up, if the camera is selected by an operator with higher prior- ity. Control of the same camera is denied to an operator with lower priority.