Mon4 Cam01 HD500 | Panasonic WJ-SX 150A specification

•To skip to the previous/next record during the play- back, move the JogDial clockwise or counterclock- wise. (Refer to the recorder’s operating instructions for the description of record.)

JogDial clockwise: Skips to the previous record.

JogDial counterclockwise: Skips to the next record.

•To display the spot picture, press the numeric but- ton corresponding to the desired camera number, then press the CAM (SET) button. Then, the active camera number will appear on the LCD.

Mon4 Cam01	R4
	/HD500

•To resume the multiscreen display, press the MULTI SCREEN button.

•To change the number of multiscreen segments, press the MULTI SCREEN button again during the multiscreen display.

3.To stop the playback, press the STOP button. The mon- itor display will return to the multiscreen display.

●Manual Recording

1.Enter the recorder mode. (Refer to p. 19 Recorder Mode.)

2.To start recording, press the REC button.

The digital disk recorder will start recording.

3.To stop the recording, hold down the REC button.

Note: Refer to WJ-HD500 Series Operating Instructions for details and other recording modes.

●Stopping REC ONLY Alarm Recording

You can stop alarm recording activated by "REC ONLY" setting of 430 CAMERA/440 ALARM PORT/450 SERIAL PORT/460 MUX MOTION DET in SETUP MENU or the Alarm Mode window in WJ-SX150A Administrator Console. (Refer to the operating instructions of matrix switcher.)

To stop the alarm recording, press the ALL RESET button while holding down the SHIFT button.

●Search Playback

You can search playback images using the Record List or Thumbnail Display. Every time you press the SEARCH/T&D SEARCH button, the monitor display will change as follows. Live image → Date-and-time entry form → Record List → Thumbnail Display → Live image...

Then, "Search Mode" will appear on the LCD.

• Date-and-time Search Playback

The recorded images can be searched for through the date and time.

1.Enter the recorder mode. (Refer to p. 19 Recorder Mode.)

2.Press the SEARCH/T&D SEARCH button. The date-and- time entry form will appear on the center of the monitor.

Search Mode /HD500

Edit Group Alm

YYYY/MM/DD HH:MM 2002/05/07 19:32

Note: The factory default setting is the current date and time.

3.Press the numeric buttons or +/– button to enter the desired date and time. The cursor can be adjusted by moving the 3D joystick rightward or leftward.

4.Press the PLAY/PAUSE button. Record List will be dis- played and the cursor will move to the closest date and time.

Note: To cancel the entry form, press the MON (ESC) or EXIT button.

Panasonic WJ-SX 150A manual Mon4 Cam01 HD500, Search Mode /HD500 Edit Group Alm

Models: WJ-SX 150A