●Settings of Administrator Console and SETUP MENU(OSD)
When WJ-SX150A Administrator Console is Ver. 2.03 or later
Select “HD300”.
When the firmware of this unit is Ver. 2.03 or later.
Select “HD300” for “CONTROL” in 600 RECORDER of SETUP MENU(OSD).
600 | RECORDER |
|
|
|
|
| CONTROL | ADR | EXT IN |
610 | MASTER |
|
| |
620 | SLAVE1 | HD300 | 01 | GENLOCK OFF |
630 | SLAVE2 | HD300 | 01 | GENLOCK OFF |
640 | SLAVE3 | HD100 | 01 |
|
650 | SLAVE4 | OFF |
| GENLOCK OFF |
DATA BIT | 7bit |
PARITY BIT | ODD |
STOP BIT | 1bit |
BAUD RATE | 9600bps |
COMM PORT | SERIAL PORT |
■Connection with Digital Disk Recorder WJ-HD220 Series
●To Confirm the Images from a Recorder Connected to the Unit
•Connection procedures are the same as
•Set the DATA setting to “PSD” for CAMERA 1 to 4 in the CAMERA SYSTEM SETUP menu of the recorder.
●To Control a Recorder via the Network
•Connection procedures are the same as
•Set the DATA setting to “PSD” for CAMERA 1 to 4 in the CAMERA SYSTEM SETUP menu of the recorder.
●Settings of Administrator Console and SETUP MENU(OSD)
Select “HD200” in the Administrator Console window.
40
